GPS units
#1
I am considering a Garmin zumo/nuvi 550 GPS but not sure about the mounting on a gen II. The bracket it comes with looks like something for a pushbike. I was hoping there might be better options to mount it perhaps between the handlebars? If nothing is available I might have to make one but would prefer off the shelf. There isn't a lot of room to mount anything without obscuring instruments or controls.

Anyone looked into the same thing or similar?
It is the mark of an educated mind to be able to entertain a thought without accepting it. - Not me..... Aristotle
Reply
#2
There is a bloke on ebay who sells mounts for gps/video cameras for bikes. They are CNC cut & use the top 4 tank/filler cap bolts to mount. It bolts around the top half of the filler cap ring & puts the gps just above the bottom of the top clamp. They are only around the $20 mark & look sturdy enough to hold a heavier modern video camera, let alone a gps. Pi_thumbsup
Reply
#3
Thanks 2wheel. That is a great thing. I will look in to it.
It is the mark of an educated mind to be able to entertain a thought without accepting it. - Not me..... Aristotle
Reply
#4
just bought the zumo 550 and the mounts are pretty average.may be good for upright bike.they do stick out a fair way.the problem is they give you a suction cup mount and a bolt on mount.each mounts have different connections.if you use the bolt on mount the power cable must stay attached in the mount and its pretty bulky.i used the suction cup on the tank and i used the cable from pc3 lcd screen to power it.(dont know if i should do it like that coz i guess the pc3 is sending out infomation)the unit itself has only a small usb connection so unless you can run it on that some how i dont know if just making a bracket will solve the problem.if anyone has a solution i'd like to know to.the gps is a good unit but mounting it sucks.
Reply
#5
Champs Wrote:I am considering a Garmin zumo/nuvi 550 GPS but not sure about the mounting on a gen II. The bracket it comes with looks like something for a pushbike. I was hoping there might be better options to mount it perhaps between the handlebars? If nothing is available I might have to make one but would prefer off the shelf. There isn't a lot of room to mount anything without obscuring instruments or controls.

Anyone looked into the same thing or similar?


If Wisdom Comes with Age , I'm one of the Smartest Blokes Here
Reply
#6
hayabusabike Wrote:just bought the zumo 550 and the mounts are pretty average.may be good for upright bike.they do stick out a fair way.the problem is they give you a suction cup mount and a bolt on mount.each mounts have different connections.if you use the bolt on mount the power cable must stay attached in the mount and its pretty bulky.i used the suction cup on the tank and i used the cable from pc3 lcd screen to power it.(dont know if i should do it like that coz i guess the pc3 is sending out infomation)the unit itself has only a small usb connection so unless you can run it on that some how i dont know if just making a bracket will solve the problem.if anyone has a solution i'd like to know to.the gps is a good unit but mounting it sucks.

don't know what happened there Anyway ,I looked into a gps for the
bike but decieded i didn't want to be distracted by looking at a gps screen.
in my opinion it would be better to get a gps that has text to speech(IE
speak's street names)Garmin do some for about $400.00,program it b4 you
leave, stick it in your pocket & listen to directions via headphones. WALLA
no CRASHE"S


If Wisdom Comes with Age , I'm one of the Smartest Blokes Here
Reply
#7
Greeny, the 550 does voice prompts if you use the car mount or a bluetooth headset in your helmet.

Also, I looked at the area I want to mount it when I went for a ride today. I think a turned shaft down the steering head centre with a locating arrangement on the contoured top nut would do the job nicely if it then attached to a standard slimline 550 mount with the power attached.

Hayabusa bike - Does the 550 provide for rider to pillion if bluetooth headsets are used? And same for music from SD card via bluetooth?

Hope that makes sense. Thanks all for the input so far, it all helps to find something that will work well.
It is the mark of an educated mind to be able to entertain a thought without accepting it. - Not me..... Aristotle
Reply
#8
Champs Wrote:Greeny, the 550 does voice prompts if you use the car mount or a bluetooth headset in your helmet.

Also, I looked at the area I want to mount it when I went for a ride today. I think a turned shaft down the steering head centre with a locating arrangement on the contoured top nut would do the job nicely if it then attached to a standard slimline 550 mount with the power attached.

Hayabusa bike - Does the 550 provide for rider to pillion if bluetooth headsets are used? And same for music from SD card via bluetooth?

Hope that makes sense. Thanks all for the input so far, it all helps to find something that will work well.

Arn't the 550's $1000.00 +


If Wisdom Comes with Age , I'm one of the Smartest Blokes Here
Reply
#9
Go to shopbot.com.au. They list prices for almost every electrical toy you can imagine from cheapest to most expensive. They are not the seller, just the reference site. I have used the service many times for all sorts of bits and saved thousands. You are still buying from a shop (mostly) so no hidden bits.

They have the 550 from $899 and I have seen most standard prices more like $1400. Still not the cheapest but it seems to be one of only two made for bike use.
It is the mark of an educated mind to be able to entertain a thought without accepting it. - Not me..... Aristotle
Reply
#10
Hi Champs this link sells Ram mounts in USA; http://www.telferizer.com/

These Guys in Mona Vale Sydney; www.gpsoz.com.au have the same mounts for sale in Australia

Nick
'The more professional you are, the closer you get to your client' Leon.

Reply
#11
busacrankin Wrote:Hi Champs this link sells Ram mounts in USA; http://www.telferizer.com/

These Guys in Mona Vale Sydney; www.gpsoz.com.au have the same mounts for sale in Australia

Nick

i dont know about pillion.not very cluey when it comes to this sort of stuff.i cant even mount it yetFrowni checked out gpsoz and thats a great site,so ill ring tomorrow and see how we go with a couple of different mounts.problem is the cradle that the zumo sits in is so very bulky.gpsoz have a steering nut mount and a resovouir mount so one of them may be the go.

ive been told by people not to use the pc3 lcd screen power lead as it may effect the gps.

hayabusabike
Reply
#12
If it (or the headsets themselves) allow rider/pillion comms the package would be complete for me. Looks like I wasn't the first to look at the central mount idea! Maybe just a few years behind the times. Certainly not the first time and won't be the last. The Rams mounts look to be the way to go if it isn't all too bulky. Their installed pics look to be quite neat and tidy.

I haven't seen the 550 in person yet. Is it bulky/thick?
It is the mark of an educated mind to be able to entertain a thought without accepting it. - Not me..... Aristotle
Reply
#13
Champs Wrote:If it (or the headsets themselves) allow rider/pillion comms the package would be complete for me. Looks like I wasn't the first to look at the central mount idea! Maybe just a few years behind the times. Certainly not the first time and won't be the last. The Rams mounts look to be the way to go if it isn't all too bulky. Their installed pics look to be quite neat and tidy.

I haven't seen the 550 in person yet. Is it bulky/thick?

units not too bad but the cradle is bulky.hopeing to use steering nut mount and maybe get a shorter connection post.
Reply
#14
THe 550 has a high sensitivity GPS receiver. Better than the average. I have a Garmin Hand Held unit, when I have it sitting on the dash in the car, the inbuilt car unit looses Satelite comms under tree cover, but the Garmin Hand Held never does.
Reply




Users browsing this thread: 1 Guest(s)