QUIT 23rd May
#16
maggot has about 5 of everything and probably one in each colour
[Image: bmr.gif]
Reply
#17
if you ever need forks, maggots probably got them in his gear sack on the back of his bike (no, really)
[Image: bmr.gif]
Reply
#18
Oh well, found a few more bits damaged. Funny, there are scratches on the RH side fairing, so it would appear it's gone over on that side but very briefly. Nothing to report really. And dead luck the titanium pipe survived with very small scratches on the logo.
LH side I need a clutch lever and counterweight. LH fairing is broken around the centre bolt, but repairable and I have another scratched one to play with. Plastic is fine really. The centre bolt for the fairing (the one that goes into the top engine mount) got snapped off so it buggered the hole a bit and I've been drilling bits out. Should be OK as I've recovered most of it. If it isn't good enough I can helicoil.
LH mirror stuffed and RH one scratched a fair bit.
Stator cover badly scratched and cracked. LH rearset (onesecondfaster item) footrest buggered. Pillion footrest scratched a bit but Ok to go back on.
All up, nothing too serious, and I will now strip it to small bits and do a bit of a resto! Well at least a few bits and pieces of bling! New paint job etc.
Thanks for the offers of parts, appreciated.
When I've finished, I will have a few extras so will do the same and pass them on to someone who has a bit of bad luck.
Cheers
Reply
#19
Ian mate, I should have a spare bar end you can have and i've got a set of stock rearsets here too if you want them (might even have a spare rear footpeg too) let me know if you want em, same price as the stator:rolleyes:
Reply
#20
I've got my old stock rearesets here, as I'd stuck on after market jobbies a while back, so that's OK. A bar end would be nice though! The rear footpeg is OK, I'd have to show you the damage, most people looking wouldn't even notice.
Cheers.
Reply
#21
Do you need a rear indicator pair? You didn't mention them, but from the sounds of it you might have gone down on them as well?
Reply
#22
Heidi1 Wrote:but from the sounds of it you might have gone down on them as well?

Bloody West Aussies will go down on anything.

Lol2 Lol2 Lol2
Reply
#23
BLACKZOOK Wrote:
Heidi1 Wrote:but from the sounds of it you might have gone down on them as well?

Bloody West Aussies will go down on anything.

Lol2 Lol2 Lol2

Bear, glad to hear u are ok. i got told it was John with other copper & silver. catch u soon on my new bike.
Reply
#24
REVIT13 Wrote:
BLACKZOOK Wrote:
Heidi1 Wrote:but from the sounds of it you might have gone down on them as well?

Bloody West Aussies will go down on anything.

Lol2 Lol2 Lol2

Bear, glad to hear u are ok. i got told it was John with other copper & silver. catch u soon on my new bike.

Back indictaors are fine (don't know why, because there is a bit of rubber stuck to the ducktail. Strange but I'm happy they are OK. And Blackzook is almost right about sandgropers.....
Rev-it. Where the hell have you been hiding and what's with the new bike. Come on spit it out!
Copper Silvers have been in for a hard time lately. Mine fell off it's stand first but came out of it with a shortened brake handle only (bit hard to do burn outs!).
Then John decked his. I think he lost it either just launching or doing a burn out. Either way, he punched a hole in his ducktail (so if anyone has one, maybe John would appreciate that!). You can contact him through me. His RH fairing peice might also be scratched but not too bad.
Then my latest effort.
Rev-it, are you going down tomorrow night? Last night so the reaction is jackpotted and MUST go to the fastest reaction even if it's not a 0.000000000.
Reply
#25
hey bear I have a copper tail section if he needs it. it was on my bike for a bit (see "frankenbusa" jindy 2006 pics) and has a couple of marks but nothing that would be too hard to touch up.

let me know
Reply




Users browsing this thread: 1 Guest(s)