Hook yours up to the battery terminal then to the seat
When you get a shock fugen change! QUICK!
43 tooth? I'd rather have a 38 toother. Just need the power to wind it out!
Have seen these before Faster. They do work a treat. (As you know) And easy to change the shift setting for personal choice.
Cheers, <i></i>
Giddy you just must have the chrome model or I could sell you a black one and you could have it plated
But then Bill told me you wouldn't have time to look at it because your always looking at the back of his bike when ever you go for a spin not quite sure what he mean't by that
FF1
ps Yep they are a good unit Phil <i></i>
Now I know you're bullshitting Faster!
I bought the black one. Then had it nickel plated!
Cheers, Anon <i></i>
FF1
+1 chrome
0400 697 254
Bruce
wood.works@bigpond.com <i></i>
Pan and Bruce you have mail
To fit these simply set mode switchs to 4 cyl, then set revs to "half" of what you want shift light to activate at. Under left hand gauge surround locate loom that leads to dash and locate the Yellow with blue trace wire (this is tach signal wire from ecu) Connect earth and power and thats it Unit comes with 5 ft of cable but can be simply cut back to what ever length suits no problem.
FF1 <i>Edited by: fasterfaster1 at: 27/10/05 6:29 am
</i>
Bruce, I'll make a deal with ya. I won't spend any more money on my bike for the whole of November if you don't... <i></i>
It works fine FF1 <i></i>
Sorry Pan, but I don't have a digital camera, (good tyre money gone to waste) that's why GDYUP uploads a pic for me at times.
I followed ffi's tips but removed a few more things for better access to the wiring loom.
One thing to remember is to find a GOOD earthing point or it won't work at all or will be intermittent. The instructions say
connect earth to CHASSIS & that's what they mean.
There's a threaded bolt hole on the left hand side of the headstem & I used that.
You can make a bracket up to hold the unit & use a forward triple clamp bolt to attach it from underneath. But hey, you can mount it anywhere. <i></i>
Too late Pan Im already committed to spending in November.
When both of ours arrive we can get together at my place and install both. Ive got all the tools and bits to make brackets and do the wiring.
<i></i>
Yes fully adjustable <i></i>
Thanks Pete wasnt as hard to fit as I first thought looks good and works a treat Regards Bill
"Secret Mod Group Is Kicking Butt"
Busa's Rule On The Rest<i></i>
Contact Us
