Login

**Ando** · 13-02-2016, 01:44pm

Does anyone know what the weights under the footpegs are for and if they need to be there? Cheers

**Shordy** · 13-02-2016, 02:37pm

They are there to try and remove the vibes coming through the pegs, in the same way that the bar end weights are huge in comparison to other bikes.
I have changed mine, and I don't notice any difference in the pegs, but after a recent long ride, the bar end weights should be retained in my opinion.

**maddogmoy** · (This post was last modified: 13-02-2016, 04:14pm by maddogmoy.)

Camel · 13-02-2016, 06:46pm

That's heavy man!

**mozzie26** · 13-02-2016, 10:27pm

That 400 odd grams is going to make a big difference on a 260kg bike! Pi_tongue

**Corpsedealer** · (This post was last modified: 14-02-2016, 06:34pm by Corpsedealer.)

I've got after market pegs on mine and don't notice the difference!
The Bars are a different story, Im running a set of dirt bike bar ends (must only weigh 20grams each) you notice the difference with the vibes at higher rev's but not unbearable! I also have foam over covers on my grips so they will be dampening some of the vibes also.

**Huls** · 14-02-2016, 07:38pm

If I want to remove 110Kg of fat from my Busa, I just hop off.

**Hayabusabike** · 14-02-2016, 07:46pm

(14-02-2016, 07:38pm)Huls Wrote: If I want to remove 110Kg of fat from my Busa, I just hop off.

What about the other 30 kilo's?

Login
Username:
Password:	Lost Password?
	Remember me