Top Speed in each gear
#1
For an 08-10 Gen 2, topping out each gear,
are these correct?

135
185
230
275
300?
3--?
Reply
#2
(03-10-2010, 07:49am)FalcoPerigri Wrote: For an 08-10 Gen 2, topping out each gear,
are these correct?

135
185
230
275
300?
3--?

Unless you've played with it ,it should only do 298 .


If Wisdom Comes with Age , I'm one of the Smartest Blokes Here
Reply
#3
Mine hits the rev limiter i'n 1st a tiny bit before 135. Around 120-125
/
Reply
#4
check out the link that Cotter posted up last week

http://www.gearingcommander.com/

The top speeds are calculated mathematically from the gear ratio's and final drive.

@10,500rpm

123.4
166.6
211.5
251
284
309.3
Reply
#5
(04-10-2010, 07:59am)BikerBoy Wrote: check out the link that Cotter posted up last week
http://www.gearingcommander.com/
The top speeds are calculated mathematically from the gear ratio's and final drive.
@10,500rpm
123.4
166.6
211.5
251
284
309.3

You could Flash the ECU limiter to 12,500 like some of us Coolsmiley don't now if top gear would wind out that far but Nerd secondly it wouldn't be real pretty if the motor let go at over 300 kph Scary
Reply
#6
Interesting, the redline is 11,000rpm
figures quoted at 10,500rpm
somewhat conservative do you think?
Reply
#7
(04-10-2010, 02:57pm)FalcoPerigri Wrote: Interesting, the redline is 11,000rpm
figures quoted at 10,500rpm
somewhat conservative do you think?

Then you also have to factor the inaccuracy of the speedo!
When does the limiter cut in??
People are like turtles....... you don't move forward unless you stick your neck out!! Boobies4
Reply
#8
(04-10-2010, 02:57pm)FalcoPerigri Wrote: Interesting, the redline is 11,000rpm
figures quoted at 10,500rpm
somewhat conservative do you think?

The taco also reads about 8 % over like the speedo
Data logger & GPS can fix all Pi_thumbsup
Reply
#9
hig
(04-10-2010, 11:38am)simmo Wrote:
(04-10-2010, 07:59am)BikerBoy Wrote: check out the link that Cotter posted up last week
http://www.gearingcommander.com/
The top speeds are calculated mathematically from the gear ratio's and final drive.
@10,500rpm
123.4
166.6
211.5
251
284
309.3

You could Flash the ECU limiter to 12,500 like some of us Coolsmiley don't now if top gear would wind out that far but Nerd secondly it wouldn't be real pretty if the motor let go at over 300 kph Scary

Wouldn't be pretty at 200kph if the motor let's go but what the hell.live life to the fullest!
The gixxers are geared way higher.165,207,242,282, in the 4 gears but also higher rpms.
Don't tempt fate,TAUNT IT!

Reply
#10
(05-10-2010, 02:57pm)simmo Wrote: The taco also reads about 8 % over like the speedo
Data logger & GPS can fix all Pi_thumbsup

Totally agreed, blind faith means you're just groping around in the dark!
Reply
#11
(13-01-2013, 11:55am)Camel Wrote:
(05-10-2010, 02:57pm)simmo Wrote: The taco also reads about 8 % over like the speedo
Data logger & GPS can fix all Pi_thumbsup

Totally agreed, blind faith means you're just groping around in the dark!

Don't we all!
Reply
#12
6th gear is just an overdrive fuel saving device. lol

(ON A STOCK BIKE THAT IS)
"If time catches up with you. You're going too slow!"
Regards BUSGO
Reply
#13
My turbo Gen 1 with 18/40 gears was bangin on the limiter (11,800rpm) at 280kph in 4th. (At my secret privately owned test track of course)
People are like turtles....... you don't move forward unless you stick your neck out!! Boobies4
Reply
#14
id guess my speedo is out on my gen 1, but i get just shy of 140 out of first
Reply
#15
(13-01-2013, 10:44pm)Skidmarx Wrote: id guess my speedo is out on my gen 1, but i get just shy of 140 out of first

And you're looking at your speedo at that speed in 1st ?

Reply




Users browsing this thread: 1 Guest(s)