Who is the quickest in stock busa engine?
#1
Just curious to know,who is the quickest in 1/4 mile with stock 1340cc engine here in OZ?
In America,they done 8.42,which is quicker,than anyone one here in Australia including the 1441 cc engine.
2008 LE,4-1 Acrapovic,Flashed,Quickshifter,Swingarm Extension,Chromed Grips,Powerbronze Screen,etc...

YEEEEEE, HAYABUSA...WAY OF LIFE!
Reply
#2
Sounds like a pretty over zealous american estimate perhaps?
Don't get me wrong, i'm not the source of all knowledge with the drags like some of the other members here, but that sounds to me like an perfect reaction time by a midget full of helium and someone forgot to start the clock..... Cant possibly be bog stock standard at under 8.5secs.
Maybe i'm just jealous coz im 6ft 1 and 130 Kgs Lol3
Every (k) over is a THRILLER ! Pi_tongue

2012 AHC BOTY Best Gen 2
2013 VVMC Best Japanese
2013 Australian Hayabusa Show & Shine BEST IN SHOW
2013 AHC BOTY Bike Of The Year Trophy
Reply
#3
(16-03-2012, 10:37am)Flying Finn Wrote: Just curious to know,who is the quickest in 1/4 mile with stock 1340cc engine here in OZ?
In America,they done 8.42,which is quicker,than anyone one here in Australia including the 1441 cc engine.

If your talking completely stock untouched bike, not many try due to wheelstands but around 10.0s,

8.42 untouched Lol2 I would like to see that
Reply
#4
It's Always ,bigger ,better & Faster in America .


If Wisdom Comes with Age , I'm one of the Smartest Blokes Here
Reply
#5
(16-03-2012, 10:37am)Flying Finn Wrote: In America,they done 8.42,which is quicker,than anyone one here in Australia including the 1441 cc engine.

and surely there must be a YouTube clip of that pass?
Reply
#6
Jeremy teasley has done that, and was confirmed by Brock davidson, the same bike has done 8.6sec. with a 200lb rider.
http://www.bikeland.org/board/viewthread.php?FID=27&TID=55223&pagenumber=1
numbers:

1.326
3.541
5.404 @ 135.04
7.035
8.423 @ 161.44

it was a stock engine with a stock clutch, but of course with extensions, lowered air shifter and racing fuel,etc. The new zx14 has also done 8.5 s with the same modifications so far...
I think the question was,
"stock engine " As for me,i have seen a stock engine gen1 with a 6 inch extension ,lowered and a quick shifter running 9.5s all day long here at willow bank,but would also like to know what is the quickest time you guys know of , for a gen. 2.
Reply
#7
Not many 600lb Hayabusa Bike/Rider combos running over here. 100lb is roughly 4 tenths which equates to what is being run here.
There's already a thread on who's the quickest Gen2 rider else where. If you want to compare your skills better to do it like for like, not many grown men will weigh Jeremy Tesleys weight again, have the budget and backing of Brock's nor the track time available.
Stock motor yes but very little around it is.
Shayne
Reply
#8
Cozmic dilussuions
Who gives a f. A. R. K.

From 2nd gear to the limit of busa rev limit

Give it the berries
Crack it ard
Enjoy it
( time - short track racer's )

The busa can offer more than a squirt
Down a quater mile-
Open road
Wide open throttle
From 7000rpm -9500rpm
Ride to the limitt

Ohh im bored


Reply
#9
how farst will thay go topend . speed limiter removed
Reply
#10
How farst thay go will depend on weight of rider etc.
Reply
#11
...and red ones are farster than black ones
Reply
#12
Exactly Pan.....your trak byke looks moor blakk than red, hents why its lite & kwik!!!!
Reply
#13
(18-03-2012, 04:08pm)CeeJay07 Wrote: Exactly Pan.....your trak byke looks moor blakk than red, hents why its lite & kwik!!!!

Brake calipers are done. Stickers are on the way buddy... Pi_thumbsup
Reply
#14
of the clock clicking 4
Reply
#15
G I thought I upset u all-
Keep up the good busa roll call at the drags

U make me look great
Reply




Users browsing this thread: