Posts: 342
Threads: 23
Joined: Feb 2011
Reputation:
0
hi all,
just chasing any recommendations for painters etc to respray and do a minor repair on the right hand side fairing on my bike??
I let the old man take it for a spin and when he got back he lost his footing and dropped it (stationary at the time). Damage is minimal, just a scuff and a slight crack in the fairing near the clutch cover...
I can get a new fairing for $400 delivered which is painted and already got the stickers on it from Suzuki, just want to see what i would be up for for a repair.
Also where would i get a set of the Buell Pegs so i can swap mine over, another casualty of the fall was the right hand peg :(
Thanks in Advance.
Posts: 341
Threads: 17
Joined: Dec 2010
Reputation:
0
(17-08-2011, 09:18am)RyanG Wrote: hi all,
just chasing any recommendations for painters etc to respray and do a minor repair on the right hand side fairing on my bike??
I let the old man take it for a spin and when he got back he lost his footing and dropped it (stationary at the time). Damage is minimal, just a scuff and a slight crack in the fairing near the clutch cover...
I can get a new fairing for $400 delivered which is painted and already got the stickers on it from Suzuki, just want to see what i would be up for for a repair.
Also where would i get a set of the Buell Pegs so i can swap mine over, another casualty of the fall was the right hand peg :(
Dam that's cheap! $400, I paid $780 for my LH side 1 month ago from Suzuki.
Thanks in Advance.
Posts: 1,516
Threads: 55
Joined: Jan 2011
Reputation:
12
17-08-2011, 11:42am
(This post was last modified: 17-08-2011, 11:43am by Shifu.)
Who do you know at Suzuki to get a new complete RH fairing for $400.00? Could you get one for me? Please  And a LH as well if possible...
Anyway the repair will cost you probably more than that so new one for that price is a bargain not to be missed.
"It is not a shame to not know, the shame is to not know and not to ask"
Posts: 342
Threads: 23
Joined: Feb 2011
Reputation:
0
I'll sell you my slightly damaged one for $200 :)
Posts: 1,516
Threads: 55
Joined: Jan 2011
Reputation:
12
(17-08-2011, 12:19pm)RyanG Wrote: I'll sell you my slightly damaged one for $200 :)
I already have one of these 
"It is not a shame to not know, the shame is to not know and not to ask"
Posts: 5,823
Threads: 401
Joined: Mar 2007
Reputation:
36
I would go the new one safe bet it will colour match 
The Buell pegs you get at
MORGAN & WACKER BRISBANE
54 Ross Street,
Newstead QLD 4006
07 3252 5691
![[Image: Resizeofbusa005.jpg]](http://i47.photobucket.com/albums/f175/HAYABUSA-ROD/Resizeofbusa005.jpg) |
REGARDS ROD
MOBILE 0433 92 99 22
kangaroos1996@msn.com |
Posts: 342
Threads: 23
Joined: Feb 2011
Reputation:
0
(17-08-2011, 03:14pm)ROD Wrote: I would go the new one safe bet it will colour match
The Buell pegs you get at
MORGAN & WACKER BRISBANE
54 Ross Street,
Newstead QLD 4006
07 3252 5691
Yeah agreed about the colour, I'm pretty anal about that sort of stuff and they never seem to be the same when they are sprayed.
Are you aware if the buell pegs will bolt straight on? I believe I have read they need to be modified? Any idea what needs to be done?
Thanks for the details mate
Posts: 5,823
Threads: 401
Joined: Mar 2007
Reputation:
36
Little bit of grinding so dont sit on exhaust and then a 10mm dynobolt to use the tube of the dynobolt around the pin 30 min tops
|
REGARDS ROD
MOBILE 0433 92 99 22
kangaroos1996@msn.com |
Posts: 1,463
Threads: 67
Joined: Sep 2010
Reputation:
3
Will you panel come with the $200 heatshield for that price?
Posts: 342
Threads: 23
Joined: Feb 2011
Reputation:
0
24-08-2011, 06:35pm
(This post was last modified: 24-08-2011, 06:36pm by RyanG.)
(17-08-2011, 04:21pm)ROD Wrote: Little bit of grinding so dont sit on exhaust and then a 10mm dynobolt to use the tube of the dynobolt around the pin 30 min tops
thanks for the info Rod, i will give them a call and see how i go...
(17-08-2011, 05:51pm)BJK1 Wrote: Will you panel come with the $200 heatshield for that price?
Heatsheild as in the foam like stuff stuck to the inside of the fairing? i would believe so, i will receive it either tomorrow or friday so i will let you know.
In other news, i ordered the wrong colour so i may have a spare (white with red stickers) to get rid of for the price i bought it for.... Very Cheap insurance....
Posts: 1,516
Threads: 55
Joined: Jan 2011
Reputation:
12
(24-08-2011, 06:35pm)RyanG Wrote: (17-08-2011, 04:21pm)ROD Wrote: Little bit of grinding so dont sit on exhaust and then a 10mm dynobolt to use the tube of the dynobolt around the pin 30 min tops
thanks for the info Rod, i will give them a call and see how i go...
(17-08-2011, 05:51pm)BJK1 Wrote: Will you panel come with the $200 heatshield for that price?
Heatsheild as in the foam like stuff stuck to the inside of the fairing? i would believe so, i will receive it either tomorrow or friday so i will let you know.
In other news, i ordered the wrong colour so i may have a spare (white with red stickers) to get rid of for the price i bought it for.... Very Cheap insurance....
Ryan, heatshields are these aluminum foil bits stuck on the inside not the foam padding. In any case if you have a spare you want to get rid off I will be happy to take it of your hands for a custom paint job. Let me know.
Cheers,
"It is not a shame to not know, the shame is to not know and not to ask"
Posts: 342
Threads: 23
Joined: Feb 2011
Reputation:
0
(24-08-2011, 10:48pm)Shifu Wrote: (24-08-2011, 06:35pm)RyanG Wrote: (17-08-2011, 04:21pm)ROD Wrote: Little bit of grinding so dont sit on exhaust and then a 10mm dynobolt to use the tube of the dynobolt around the pin 30 min tops
thanks for the info Rod, i will give them a call and see how i go...
(17-08-2011, 05:51pm)BJK1 Wrote: Will you panel come with the $200 heatshield for that price?
Heatsheild as in the foam like stuff stuck to the inside of the fairing? i would believe so, i will receive it either tomorrow or friday so i will let you know.
In other news, i ordered the wrong colour so i may have a spare (white with red stickers) to get rid of for the price i bought it for.... Very Cheap insurance....
Ryan, heatshields are these aluminum foil bits stuck on the inside not the foam padding. In any case if you have a spare you want to get rid off I will be happy to take it of your hands for a custom paint job. Let me know.
Cheers,
Yeah sorry those are the bits i ment... $200 for them ay... will be good to see if they come with the fairing. im guessing its not easy removing the existing ones and re-sticking them on??
Posts: 1,516
Threads: 55
Joined: Jan 2011
Reputation:
12
25-08-2011, 10:15pm
(This post was last modified: 25-08-2011, 10:16pm by Shifu.)
Ryan, heatshields are these aluminum foil bits stuck on the inside not the foam padding. In any case if you have a spare you want to get rid off I will be happy to take it of your hands for a custom paint job. Let me know.
Cheers,
[/quote]
Yeah sorry those are the bits i ment... $200 for them ay... will be good to see if they come with the fairing. im guessing its not easy removing the existing ones and re-sticking them on??
[/quote]
They are a bitch to take off as the foil will tear easily. Designed for once only use Maybe heat gun would help, don't know as I have not tried that method. I have a spare set of them bought just in case when I ordered mine. But my fairings came with heatshields attached. The dealer said that it is not consistant as sometime they are not there.
Cheers.
"It is not a shame to not know, the shame is to not know and not to ask"
Posts: 342
Threads: 23
Joined: Feb 2011
Reputation:
0
(17-08-2011, 03:14pm)ROD Wrote: The Buell pegs you get at
MORGAN & WACKER BRISBANE
54 Ross Street,
Newstead QLD 4006
07 3252 5691
Just ordered, $52.80 a set! cant complain about that!!
|
Contact Us
