Posts: 534
Threads: 80
Joined: Jan 2008
Reputation:
0
Tony Nitrous Wrote:Anyone know anything about these.....
Not just for Busa's but on other injected bikes......
http://www.afrtuner.com/description.html
Came up on another Forum.
Downside is current model has to be had wired,
Next generation will be Plug-in.
Good ?
Bad ?
Competition for a Power Commander ?
Thanks,
Tony.J.
A quick browse of the manual it looks like there is a reasonable array of data logging abilities as well as running open loop or closed loop. Seems like a bit of wiring involved but is explained well for busa installation. You can get a PC3 and wideband commander for about the same coin I think, but the wideband will not work as a closed loop system and has less logging features. I cant tell if it is a piggy back system or standalone.
I use a wideband commander and although it does work extremely well for tuning, I would like some more data logging features and it could be a bit more user friendly.
If it had shift light output and shift kill I might be tempted.
There is no strong performance without a little fanaticism in the performer
Posts: 194
Threads: 17
Joined: Aug 2007
Reputation:
1
I looked at the AFR tuner it looked a good unit, but you have to cut in to your wiring harness.
What I now use is a wideband commander as a logger, I take the info it gives as well as the current map from the pc3 put it all in to some software I have and out comes a new map well sort off, it give you what you have to change in your current map.
I myself find this works better for me because you are mapping to load/riding not to what the dyno guy tells you/thinks
Contact Us
