Raptor Shift Lights

[fasterfaster1]

Great to hear no probs in fitting Bill and also happy with the result
FF1 <i></i>

[1hotBUSA]

Ditto interested in a group buy on one of these. FF1 would you be able to PM me a price for one of these units.

Regards
Graham
1hotBUSA
2000 Suzuki Hayabusa Red/Grey Bog standard except for bling and a kanooter valve. Oh and a turbo kit on the floor.
Strike a blow for freedom...Smash a speed camera!!!
Red Bikes Rule!!!!!<i></i>

[pan]

Just picked up mine in the mail today. Thanks Pete.
Come with two covers, RED and BLACK!
"sometimes, crime does pay"

Employee of the Month
Easyrider Imports
www.easyriderimports.com.au

<i></i>

[fasterfaster1]

No probs Pan ....they come with the cover of the LED's Yours being RED hence the RED cover I believe the Black cover is to cover it at night so it doesn't blind ya
FF1 <i></i>

[Djpete]

Just tell me to shutup if this is a silly question but can u get them with sort of rainbow colors?
Also I never get my bike into the red rev range, I heard it's not very good for the motor, so is there some sort of a switch I could rig up so I could just flash it on and off at night when the chickies are watching?
Also is there a place more prominent it could be mounted like on the front headlight or something...?
Sorry to be a pain... Cheers,
Pete




Z Web World
Mobile Dj, Web Design,
Photography, Bullshit Artist!<i></i>

[Blackzook]

Got mine today great service!

Got the other bits too mmmmmmshineyyyyyyyyy

Thanks mate. <i></i>

[Xhiler8r]

Hey Pete are my parts in yet ? Regards Bill

"Secret Mod Group Is Kicking Butt"

Busa's Rule On The Rest<i></i>

[fasterfaster1]

DJ I can set you up a special preset unit with the shift light set at 4000 RPM as for the rainbow effect if you buy about three with different colour LED and then can set them up seperately at 100RPM increments then they should match ya MYER window flouro's
Or .....................made up a clear belly pan and could put goldfish in it and with the purple fluoro backdrop she would be instant chick magnet Bling Bling Bling

Bill will do a check on shipment and let you know tonight
Blackzook ..............................shiny HUH king of bling or what ?
FF1 <i>Edited by: fasterfaster1 at: 4/11/05 6:44 pm
</i>

[Blackzook]

<i></i>

[Djpete]

um...thanks for that Pete... <i></i>

[fasterfaster1]

All colour shift lights now back in stock Also new line I will have available shortly are RPM window switchs
This 2 channel RPM activated window switch (RPMWS) also has an integrated
throttle-position activation switch (TPAS)! The unit accepts most tach
signals, including low-voltage and irregular signals such as those found
on many V-10s. The TPAS accepts all analog throttle-position sensor
signals as well as a "hot" or "grounded" wide-open-throttle (WOT) switch.

Both channels have their own settable ON and OFF points, and each has its
own multi-gear lockout feature, which allows it to be turned off until you
have cycled through the window. The internal TPAS can be configured to
prevent the RPMWS channels from activating unless you are at WOT.

The RPM WINDOW SWITCH requires 9~18 volts to operate correctly. The output
lines switch ground when activated (ON) and have a maximum current rating
of 1 amp. All this and only the size of a spark plug box.

Prices to follow shortly as soon as shipping costs worked out
FF1
<i></i>

[Xhiler8r]

Hey Pete what is the update on the shiney bits Regards Bill

"Secret Mod Group Is Kicking Butt"

Busa's Rule On The Rest<i></i>

[Blackzook]

This 2 channel RPM activated window switch (RPMWS) also has an integrated
throttle-position activation switch (TPAS)! The unit accepts most tach
signals, including low-voltage and irregular signals such as those found
on many V-10s. The TPAS accepts all analog throttle-position sensor
signals as well as a "hot" or "grounded" wide-open-throttle (WOT) switch.

Both channels have their own settable ON and OFF points, and each has its
own multi-gear lockout feature, which allows it to be turned off until you
have cycled through the window. The internal TPAS can be configured to
prevent the RPMWS channels from activating unless you are at WOT.

The RPM WINDOW SWITCH requires 9~18 volts to operate correctly. The output
lines switch ground when activated (ON) and have a maximum current rating
of 1 amp. All this and only the size of a spark plug box..

FF1
That is amazing if it really only the size of a sparkplug box then I definately want one to chock up the leg on my pool table.

What exactly is this for <i></i>

[fasterfaster1]

It's OK Blackzook you don't need one Shhhhhhhhhh it's a secret don't tell
FF1 <i></i>

[fasterfaster1]

Hey Bill ....................either tomorrow or Wednesday you will see something shiny in the letterbox Or at least a letter telling you that something shiny awaits you at the PO The "BLING" has left the building Bill.
FF1 <i></i>