Remapping std ECU on the dyno

[spamanglenn]

so exactly what has to be done to plug in the tuneboy software.does the ecu have to be notched and a plu made up or is the yosh tune plug used for tuning.My tuner has tuned with tuneboy and would be definately interested in trying this.I,m also a fan of onroad trimming of air/fuel to some extent.

[gazza414]

Mine has been spliced into the ECU connector..no notching required..that is for other work which has been written up on the org site.
In future ,the software will come as a plug and play straight onto the ECU harness.

On the trip down to PI..my Busa is cruising at 140km/hr at 10% Throttle position..it provides a very good case for part throttle tuning . In the future the software will have functionality over MAP mapping in this lower range.