Contact Us
03-11-2000, 06:32am
Made a few enquiries around the traps about this system several months ago and apparently the down sides are
1\ A lot of fairing modification
2\ Very limited cornering clearance on L\H side
3\ Jobs are contracted out -not done in house !
4\ Figures are a little shall we say..enhanced !!
5\ Over all primitive and untidy
Mr Turbo is definately the way to go, remember it's fine to have the power but the rideability and reliability has to also be there or it becomes a pain in the arse.
Try www.americanturbo.com ,most work involved is removing the barrels to fit a thicker base gasket to lower compression (could be a good time to fit one after the tensioner dump).When I rang it was a six month wait on the kits. ( bugger ) Ok would be most interested to hear from some one if they are going to import one.Our dollar value has certianly put the price up here. Blue Busa
1\ A lot of fairing modification
2\ Very limited cornering clearance on L\H side
3\ Jobs are contracted out -not done in house !
4\ Figures are a little shall we say..enhanced !!
5\ Over all primitive and untidy
Mr Turbo is definately the way to go, remember it's fine to have the power but the rideability and reliability has to also be there or it becomes a pain in the arse.
Try www.americanturbo.com ,most work involved is removing the barrels to fit a thicker base gasket to lower compression (could be a good time to fit one after the tensioner dump).When I rang it was a six month wait on the kits. ( bugger ) Ok would be most interested to hear from some one if they are going to import one.Our dollar value has certianly put the price up here. Blue Busa