28-07-2005, 07:56am
Raz ........if no problem is evident in the operation of your bike, a once a year check (bikes that are ridden this is) at a cost of around the $80 mark gives you a full fuel read and a Hp and torque check .................if all readings are as they should be then nothing futher (as in Dyno Run) is required. Apart from that, at initial set up as when the bike is new (as they are certianly not set to optimum out of the crate) and also whenever ANY modification is done to inlet or exhaust side of motor is carried out then Dyno run is a must to check and correctly adjust fueling. Now anyone that thinks that this is an excessive amount of to ensure that all is sweet.................certainly should not buy a Busa Thats like about the equivalent to a set of chrome Kanji symbol valve caps
Just because you can't see it doesn't mean it ain't "BLING"
Hope this helps you somewhat Raz
FF1 Edited by: fasterfaster1 at: 28/7/05 8:04 am
Just because you can't see it doesn't mean it ain't "BLING"
Hope this helps you somewhat Raz
FF1 Edited by: fasterfaster1 at: 28/7/05 8:04 am