Contact Us
22-11-2006, 04:50pm
BBB,
Any adjustment to the bar height will impact in one way or another.
The 30mm spacers and Helibars are ok for screen clearance and you can use the standard brake and clutch lines. Both require that you re-route the fast idle cable from the left switchblock. Look at the photo of Glen's bike above and you can see that he has changed the side this cable tracks down, you wont need to go that far but you will have to route it under the front edge of the tank on the right. It's a five minute job at worst.
Bruce
N2O no laughing matter
Any adjustment to the bar height will impact in one way or another.
The 30mm spacers and Helibars are ok for screen clearance and you can use the standard brake and clutch lines. Both require that you re-route the fast idle cable from the left switchblock. Look at the photo of Glen's bike above and you can see that he has changed the side this cable tracks down, you wont need to go that far but you will have to route it under the front edge of the tank on the right. It's a five minute job at worst.
Bruce
N2O no laughing matter