ENGINE CASE SLIDER INSTALATION

[pan]

Easy.

1. loosen up the 3 bolts (see my pic)
2. Get a mate to hold the bike leaning to the right side (opposite the way it leans on the kick stand), so the oil drains to the right
3. try and fit it on with the spacers provided (explains itself once you try it) - you may have to grind or dremmel away a little piece of your fairing where the top left bolt goes in
4. fit it on, tighten, apply loctite if you wish
5. go easy on left turns on the race track , as this may happen!!