ENGINE CASE SLIDER INSTALATION - Printable Version +- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB) +-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35) +--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5) +--- Thread: ENGINE CASE SLIDER INSTALATION (/showthread.php?tid=21374)

ENGINE CASE SLIDER INSTALATION - markb187 - 23-01-2014 I'VE BOUGHT A 3 BOLT ENGINE CASE SLIDER. NEED HELP FOR INTALLING IT. RE: ENGINE CASE SLIDER INSTALATION - pan - 23-01-2014 Left side of bike? Stator cover type? RE: ENGINE CASE SLIDER INSTALATION - markb187 - 23-01-2014 oh shit. left side.lol RE: ENGINE CASE SLIDER INSTALATION - pan - 23-01-2014 Like this? RE: ENGINE CASE SLIDER INSTALATION - markb187 - 23-01-2014 that's it. RE: ENGINE CASE SLIDER INSTALATION - pan - 23-01-2014 Easy. 1. loosen up the 3 bolts (see my pic) 2. Get a mate to hold the bike leaning to the right side (opposite the way it leans on the kick stand), so the oil drains to the right 3. try and fit it on with the spacers provided (explains itself once you try it) - you may have to grind or dremmel away a little piece of your fairing where the top left bolt goes in 4. fit it on, tighten, apply loctite if you wish 5. go easy on left turns on the race track , as this may happen!!