Contact Us
27-05-2012, 07:44am
Gday Guys and Girls.
We have a 2003 busa with a hooter. So far we cant find ID marks, but havent taken it off yet. It runs a secndary fuel rail, and intercooler. Unfortunately I found out the hard way that the intercooler fouls on the front tire. Subsequently we took the bottom 3 cores out and cut the front guard. Now I can enjoy monos again. What we do know is that we have 8lbs boost. Microtech MT4. The barrels have been taken off. I was told is has ceramic coated pistons and titanium studs? Am still trying to find the builder. 70mm Ti exhaust, short yoshi can. Recently fitted an adjustable 125mm over swingarm.Running 16/40 sprockets. Just smoked the tire to a slow 7.1 sec 1/8 on an airstrip (10mm cross cuts every 90mm) Looking any pearls of wisdom the group can offer. The Goat.
When your not racing, your only waiting!
We have a 2003 busa with a hooter. So far we cant find ID marks, but havent taken it off yet. It runs a secndary fuel rail, and intercooler. Unfortunately I found out the hard way that the intercooler fouls on the front tire. Subsequently we took the bottom 3 cores out and cut the front guard. Now I can enjoy monos again. What we do know is that we have 8lbs boost. Microtech MT4. The barrels have been taken off. I was told is has ceramic coated pistons and titanium studs? Am still trying to find the builder. 70mm Ti exhaust, short yoshi can. Recently fitted an adjustable 125mm over swingarm.Running 16/40 sprockets. Just smoked the tire to a slow 7.1 sec 1/8 on an airstrip (10mm cross cuts every 90mm) Looking any pearls of wisdom the group can offer. The Goat.
When your not racing, your only waiting!
When your not Racing, your only waiting!