Contact Us
24-03-2012, 09:50pm
So has anyone swaped their gen1 clutch slave cylinder
For a late model 07 or '11 parts box
If you look at all gen1's the slave cylinder parts change
As mine is an '01 ...
Suzuki had added a rubber dust seal on the '07
Then took it away on the '11 -but added a cover plate to some-not all ..
As I'm servicing this area to stop all the road grim
From travellin past the slave cylinder-past the inner rubber seal
& up through the clutch line to the handle bar lever reservior-
-any ideas or just continue with '07 kit with outer rubber seal +
outer cover plate with the hole in it for push pin mechanism
To clean up clutch system...
as always if you accept this challenge -advisable alcohole may cum your way
For a late model 07 or '11 parts box
If you look at all gen1's the slave cylinder parts change
As mine is an '01 ...
Suzuki had added a rubber dust seal on the '07
Then took it away on the '11 -but added a cover plate to some-not all ..
As I'm servicing this area to stop all the road grim
From travellin past the slave cylinder-past the inner rubber seal
& up through the clutch line to the handle bar lever reservior-
-any ideas or just continue with '07 kit with outer rubber seal +
outer cover plate with the hole in it for push pin mechanism
To clean up clutch system...
as always if you accept this challenge -advisable alcohole may cum your way