what type of resistor is required for LED indicators?

[piperjon]

Ok.
I bought LED'S for my 4x4 to put on the rear and they did flash very quickly as well. So I bought two resistors and what you do is add one end to the live wire to you LED and the other end to earth and that slows down.
John

---

1 resistor for each LED. Putting the resistors in line will not slow them down. so you do what I said before.
John

I think he needs to know what resistance value the resistors are.

I'll check what mine are and let it be know.
John

---

Ok.
What is on my resistors is 12V & same resistance as 21watt bulb. Funny!!
I feel sure the resistors he has by earthing out one end will work ok.
John