Contact Us
27-08-2006, 09:49pm
G'day Chillidude and to the dark side of Ulysses riding.
Given that the standard busa cans are a rough finish to say the least, a polish job is a big one but I have seen it done really well but not by hand I'm afraid.
You could certainly clean some scratches up but not with fine wet and dry. With perseverence you can accomplish anything.
With money you can buy a set of new OEM cans pretty cheap from other members.
If you start hanging with other members, you will soon end up with aftermarket cans I reckon.
Rgds BUSGO
"TAKE MY ADVICE"
I'm not using it anyway!<i></i>
Given that the standard busa cans are a rough finish to say the least, a polish job is a big one but I have seen it done really well but not by hand I'm afraid.
You could certainly clean some scratches up but not with fine wet and dry. With perseverence you can accomplish anything.
With money you can buy a set of new OEM cans pretty cheap from other members.
If you start hanging with other members, you will soon end up with aftermarket cans I reckon.
Rgds BUSGO
"TAKE MY ADVICE"
I'm not using it anyway!<i></i>