Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED
U won't believe this one - Bootscootin! - Printable Version

+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Technical Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=5)
+--- Thread: U won't believe this one - Bootscootin! (/showthread.php?tid=1455)

Pages: 1 2


U won't believe this one - Bootscootin! - Djpete - 18-08-2006

Ok all went well with my trip to Wilson's Prom.
But I gave my cousin my windore smith boots to wear along with my leather jacket etc.

3/4 the way back I notice that the buckle part of the boots has scratched (and I mean scratched not rubbed!) both sides of the part above the rear footpegs. Mine are polished too!
I don't think it will buff out.
Any suggestions, best way to tackle it??

Little to say I WAS NOT impressed.
MAybe I can sue someone....Windsor Smith maybe??

Help! Cheers,
Pete

zweb@tpg.com.au



Z Web World
Mobile Dj, Web Design, Photography, Bullshit Artist!<i></i>


Re: U won't believe this one - Bootscootin! - BUSGO - 18-08-2006

BUGGAR!
If it is the pillion footpeg and pipe support bracket you are talking about, and they are simply polished and not painted or chromed.
You can rub them out with very fine wet and dry paper.
If the scratches are deep then use a harsher paper to start with and go to a superfine paper to finish off.

Now get out in the shed and fixem.

Rgds BUSGO

"TAKE MY ADVICE"
I'm not using it anyway!<i></i>


Re: U won't believe this one - Bootscootin! - Djpete - 18-08-2006

Yeah knowing my luck I'll make em worserer!
Just got quoted 25 each on the phone.
That'll do...fixed next week.
Rip the whole rear seat cowling etc off afuckingian!! Cheers,
Pete

zweb@tpg.com.au



Z Web World
Mobile Dj, Web Design, Photography, Bullshit Artist!<i></i>


Re: U won't believe this one - Bootscootin! - demeester - 19-08-2006

Don't forget to attach the cable for your key when you re-assemble :P <i></i>


Re: U won't believe this one - Bootscootin! - bandit17172 - 19-08-2006

Quote: Don't forget to attach the cable for your key when you re-assemble


Regards Rob



never argue with a fool he will just drag you down to his level and he will beat you with experience<i></i>


Re: U won't believe this one - Bootscootin! - Djpete - 19-08-2006

(Thanks for the cd too Bandit) Cheers,
Pete

zweb@tpg.com.au



Z Web World
Mobile Dj, Web Design, Photography, Bullshit Artist!<i></i>


Re: U won't believe this one - Bootscootin! - BUSGO - 19-08-2006

Pete, you could have them repaired and shiny better than new in the time it takes you to take them off. Let alone reassemble the back end.


Rgds BUSGO

"TAKE MY ADVICE"
I'm not using it anyway!<i></i>


Re: U won't believe this one - Bootscootin! - BUSGO - 19-08-2006

Use the wet and dry paper as I explained up the discussion a bit further.
If you need to buy some. Make sure you get a combo pack of sandpaper.
It should have Fine (1200grain) Medium (800grain) and Coarse (600grain) sheets of paper in a pack.
Or just get the medium and fine paper in sheets.
When you rub with the paper, you wet it and it goes a bit pasty, sort of a course polish.
You start with the coarse paper to make the scratches go away and then work down to the fine paper to give a shiny surface. Then polish them off with a fine Metal polish like Purple or Autosol.
It should only take you an hour or so at most if you leave the brackets on the bike.

OH! I see, you have already whipped em off while I was typing my reply.







Rgds BUSGO

"TAKE MY ADVICE"
I'm not using it anyway!<i>Edited by: BUSGO at: 19/8/06 1:04 pm
</i>


Re: U won't believe this one - Bootscootin! - Djpete - 19-08-2006

yeah I'm listening...how? Cheers,
Pete

zweb@tpg.com.au



Z Web World
Mobile Dj, Web Design, Photography, Bullshit Artist!<i></i>


Bootscootin! - The Evidence - Djpete - 19-08-2006

Another lesson learned...



Cheers,
Pete

zweb@tpg.com.au



Z Web World
Mobile Dj, Web Design, Photography, Bullshit Artist!<i></i>


Bootscootin! - Happy Ending - Djpete - 19-08-2006

You're a genuious Busgo!
Had some 1200, thought nothing to lose.
30 mins each one, then some polish, looks good to me...
All back together...the end.







Cheers,
Pete

zweb@tpg.com.au



Z Web World
Mobile Dj, Web Design, Photography, Bullshit Artist!<i></i>


Re: Bootscootin! - Happy Ending - BUSGO - 19-08-2006

Your welcome Pete.

You can do mine for me at Jindy...



Rgds BUSGO

"TAKE MY ADVICE"
I'm not using it anyway!<i></i>


Re: Bootscootin! - Happy Ending - AstroBusa - 19-08-2006

Great teacher... great student.... great result.

Well done to the Busgo and DjPete repair team ! The older I get, the better I was. Regards.... Rob<i></i>


Re: Bootscootin! - Happy Ending - Djpete - 20-08-2006

great summary!
Cheers,
Pete

zweb@tpg.com.au



Z Web World
Mobile Dj, Web Design, Photography, Bullshit Artist!<i></i>


Re: Bootscootin! - Happy Ending - glen66 - 20-08-2006

Don't forget to punch your cousin in the back of the head. Unless he's bigger than you. <i></i>