Contact Us
12-01-2010, 05:14pm
(This post was last modified: 12-01-2010, 05:20pm by fasterfaster.)
Don't block that one or she will run like a hairy goat lol
See the pipe in picture with the blank off on it ............. on the opposite corner (on the other side at rear about 12 mm diameter) there is a pipe that goes down to the Pair valve at the front of the motor. Stick a marble in that one. Then get you A/F redone .............. preferably by some one that knows what they are doing, as to be honest the A/F should not have been mapped with the Pair in operation. (Competition & Race use only )
See the pipe in picture with the blank off on it ............. on the opposite corner (on the other side at rear about 12 mm diameter) there is a pipe that goes down to the Pair valve at the front of the motor. Stick a marble in that one. Then get you A/F redone .............. preferably by some one that knows what they are doing, as to be honest the A/F should not have been mapped with the Pair in operation. (Competition & Race use only )