Contact Us
05-01-2008, 09:38pm
What are you planning for engine management ? how much hp are you after .
rough rule of thumb 5cc/min/hp so for say 300hp you will need 1500cc/min fuel in the cylinders so 4 x 380cc injectors maxed out at 100% dutycycle will just do it ,be better with 400cc
or use a FMU to push the fuel pressures very high to make the std 240cc injectors flow more(only good to ~280hp at ~90-95psi
Are you going to be able to fit the 040 in the tank easily ,
rough rule of thumb 5cc/min/hp so for say 300hp you will need 1500cc/min fuel in the cylinders so 4 x 380cc injectors maxed out at 100% dutycycle will just do it ,be better with 400cc
or use a FMU to push the fuel pressures very high to make the std 240cc injectors flow more(only good to ~280hp at ~90-95psi
Are you going to be able to fit the 040 in the tank easily ,