Raptor Shift Lights

[Xhiler8r]

you sitting on it or looking at the front simple question lol Regards Bill

"Secret Mod Group Is Kicking Butt"

Busa's Rule On The Rest<i></i>

[Xhiler8r]

anyway why am i getting advice form you isnt your light doing the same shit as mine Regards Bill

"Secret Mod Group Is Kicking Butt"

Busa's Rule On The Rest<i></i>

[Xhiler8r]

Quote:I think I fixed it today. Got home earlier than I thought so I had a go and did this...It was connected at the blue arrow, so I re-connected it at the red arrow


and You Mr, Pan I have looked everywhere and my bike just doesnt have any red and blue arrows Regards Bill

"Secret Mod Group Is Kicking Butt"

Busa's Rule On The Rest<i>Edited by: Xhiler8r&nbsp; at: 15/11/05 12:07 am
</i>

[pan]

Accesory plug is on the right side as you sit on the bike.

Blue and Red arrows are a SMG extra...
"sometimes, crime does pay"

Employee of the Year
Easyrider Imports
www.easyriderimports.com.au

<i></i>

[Xhiler8r]

now as the founder of the SMG how did this mod escape my eyes

anyway thanks mate when I finally decide to go looking again I will until then no way am I pulling this bike apart again oops actually i will be when Shredder finally delivers his SMG part to me Regards Bill

"Secret Mod Group Is Kicking Butt"

Busa's Rule On The Rest<i></i>

[andycool]

Hey FF

Did you send a light to me?
Checked the post today Tuesday and nothing there??

Can you let me know



"BLUE and SILVER BLING is the BEST THING!!!!"

Andrew :)<i></i>

[fasterfaster1]

Andy sent on the 11/11 to your PO Box
FF1 <i></i>

[simmo]

Sorry Andy no Blue ones left, sending you a Copper one instead
Cheers Robert
World Wide CEO
Easyrider Imports
www.easyriderimports.com.au
<i></i>

[rev 01]

I agree with FF1 about the soldered joints too, take those crimping connectors you got from Supa Cheap & toss em

Finding the tach wire is a lot easier if you unbolt the instrument panel, lift it out & remove the connector plug.
Then you can see much better & trace the tach wire back in the loom to a convenient place to add the join. <i></i>

[fasterfaster1]

Hey Bill those maggots certianly pull the cover home sweet don't they If it wasn't for the oil ya wouldn't need bolts
If you remove the left hand gauge surround and look at where the loom splits and goes of up to the gauges, if you peel a small amount of the loom wrap away from this section you can pick up the tach wire there.


FF1 <i>Edited by: fasterfaster1 at: 15/11/05 11:14 pm
</i>

[andycool]

Hi FF1

Got the light this morning thanks

Put it in already and seems to be working a treat!!!

Hey where is my blue cover, it only came with a red and black one

What The?????



"BLUE and SILVER BLING is the BEST THING!!!!"

Andrew :)<i>Edited by: andycool&nbsp; at: 16/11/05 1:01 pm
</i>

[fasterfaster1]

Andy the black colour is a block out cover, and the red is for night use if required. They come with a black cover and a cover the same colour as the light led's To get a blue cover you would have to order a shift light with blue LED (Wouldn't recommend it)
Goiod to hear it's all working ...as they do
FF1 <i></i>

[pan]

Hi Andy. You may be able to get a "blue cover" at shops like Clark Rubber. They may be listed as a chair-leg thingie, or a door stopper... don't know if it'll be transparent though.

The shift light is red because red is faster!


"sometimes, crime does pay"

Employee of the Year
Easyrider Imports
www.easyriderimports.com.au

<i></i>

[andycool]

One thing I just noticed , my light works perfectly set on 2 cyl and on 4 cyl setting it doesnt register , Why is that you reckon , I dont care what it is set on as long as it tells me when to change at the right time!!



"BLUE and SILVER BLING is the BEST THING!!!!"

Andrew :)<i></i>

[andycool]

wanted to add , it is raining in sydney , will it stand up to any moisture as you know the busas arent very protected!!



"BLUE and SILVER BLING is the BEST THING!!!!"

Andrew :)<i></i>