Dyno recommendations - NSW

[BikerBoy]

hey guys, I'm chasing up for a friend some recommendations for a dyno centre that know what they're doing.

He lives an hour North of Sydney but willing to travel a bit, if it means he gets a decent AFR map done - his last one got f****d up.

FasterFaster is a bit too far North for him, but if anyone in NSW can give me a few suggestions I can pass on, it would be a big help.

Cheers,

edit: it's for a gsx650f, so none of our maps will be any good.

[Shifu]

hey guys, I'm chasing up for a friend some recommendations for a dyno centre that know what they're doing.

He lives an hour North of Sydney but willing to travel a bit, if it means he gets a decent AFR map done - his last one got f****d up.

FasterFaster is a bit too far North for him, but if anyone in NSW can give me a few suggestions I can pass on, it would be a big help.

Cheers,

I got a map from my last dyno by Jim Hanlon and could e-mail it to you. Bike was stock except the full Akrapovic exhaust system. He could at least try it. Does he have an ECU connector harness and the ECU Editor to load it up?

[BikerBoy]

Thanks Andrew.

Forgot to mention though it aint a busa...only 'half-a-busa' aka GSX650F so none of our maps will be any good.

[GRUNTMAX]

Most Dynos are not into flashing due to the time it takes.
Nothin like "real time" tuning.
You've only gota work out how to convert the "piggyback PCV map" into an ECU Editor Map.;
http://www.powercommander.com/powercomma...der_v.aspx

http://www.powercommander.com/powercomma...otune.aspx

http://www.powercommander.com/powercomma...aspx?mk=21&mdl=180&yr=2009&pc=20-008-PTI&mk-n=Suzuki&mdl-n=GSX%201300%20Hayabusa&pc-ver=PCV&add-mdlyrid=20-00820-008-PTI&add-mdlyrid2=20-00820-008-PTI&fullstr=20-00820-008-PTI&prod-type=Powercommander%20VPowercommander%20V%20(pressure-temp%20input)

or

350 hours data logging capacity!;

http://store.schnitzracing.com/ecu-flash...usa-08-12/

Doesn't look like there is one for a 650 sorry;

Tell ya mate to sell that Dinky.
-----------------------------------------------------------------------------------------

Can not see a gsx650f listed anywhere.
http://ecuhacking.activeboard.com/

[kev11e]

G'day
Gee, if someone knows a dyno joint around Penrith, that might suit us both coz I'd like to go do the tuning thing on my '06.
Regards
Kevin

[pan]

S&R Pro are at Penrith. I've heard they go alright.

[wayneb60]

had work & other stuff done there when I first started to ride always happy with there work Jamie is a good guy
so give him a call 47322203
cheers wayne

[BikerBoy]

Thanks guys, I'll pass on the info for S&R.

---

Most Dynos are not into flashing due to the time it takes.
Nothin like "real time" tuning.
You've only gota work out how to convert the "piggyback PCV map" into an ECU Editor Map.;
http://www.powercommander.com/powercomma...der_v.aspx

http://www.powercommander.com/powercomma...otune.aspx

http://www.powercommander.com/powercomma...aspx?mk=21&mdl=180&yr=2009&pc=20-008-PTI&mk-n=Suzuki&mdl-n=GSX%201300%20Hayabusa&pc-ver=PCV&add-mdlyrid=20-00820-008-PTI&add-mdlyrid2=20-00820-008-PTI&fullstr=20-00820-008-PTI&prod-type=Powercommander%20VPowercommander%20V%20(pressure-temp%20input)

or

350 hours data logging capacity!;

http://store.schnitzracing.com/ecu-flash...usa-08-12/

Doesn't look like there is one for a 650 sorry;

Tell ya mate to sell that Dinky.
-----------------------------------------------------------------------------------------

Can not see a gsx650f listed anywhere.
http://ecuhacking.activeboard.com/

I've come across the piggy-back PCV to ecu-editor before but can't remember if it worked or not, but Justin from Woolich Racing should be able to help out on that one.

Thanks GM.

[Dale]

I've also heard good things about S&R Pro

[kev11e]

G'day
Thanks for that - I'll givem a call
Regards
kevin

[simmo]

Race & Track Moorebank

[pan]

Mr Hands, Londonderry

[garbo]

Sportcycles Gateshead (Newcastle) Jamie & Andy 49432030 Mark