+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: General Discussion (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=1)
+--- Thread: Dyno recommendations - NSW (/showthread.php?tid=21114)
Dyno recommendations - NSW - BikerBoy - 04-11-2013
hey guys, I'm chasing up for a friend some recommendations for a dyno centre that know what they're doing.
He lives an hour North of Sydney but willing to travel a bit, if it means he gets a decent AFR map done - his last one got f****d up.
FasterFaster is a bit too far North for him, but if anyone in NSW can give me a few suggestions I can pass on, it would be a big help.
Cheers,
edit: it's for a gsx650f, so none of our maps will be any good.
RE: Dyno recommendations - NSW - Shifu - 04-11-2013
(04-11-2013, 11:04am)BikerBoy Wrote: hey guys, I'm chasing up for a friend some recommendations for a dyno centre that know what they're doing.
He lives an hour North of Sydney but willing to travel a bit, if it means he gets a decent AFR map done - his last one got f****d up.
FasterFaster is a bit too far North for him, but if anyone in NSW can give me a few suggestions I can pass on, it would be a big help.
Cheers,
I got a map from my last dyno by Jim Hanlon and could e-mail it to you. Bike was stock except the full Akrapovic exhaust system. He could at least try it. Does he have an ECU connector harness and the ECU Editor to load it up?
RE: Dyno recommendations - NSW - BikerBoy - 04-11-2013
Thanks Andrew.
Forgot to mention though it aint a busa...only 'half-a-busa' aka GSX650F so none of our maps will be any good.
RE: Dyno recommendations - NSW - GRUNTMAX - 04-11-2013
Most Dynos are not into flashing due to the time it takes.
Nothin like "real time" tuning.
You've only gota work out how to convert the "piggyback PCV map" into an ECU Editor Map.;
http://www.powercommander.com/powercommander/products/powercommanderv/powercommander_v.aspx
http://www.powercommander.com/powercommander/products/AutoTune/powercommander_autotune.aspx
http://www.powercommander.com/powercommander/powercommanders.aspx?mk=21&mdl=180&yr=2009&pc=20-008-PTI&mk-n=Suzuki&mdl-n=GSX%201300%20Hayabusa&pc-ver=PCV&add-mdlyrid=20-00820-008-PTI&add-mdlyrid2=20-00820-008-PTI&fullstr=20-00820-008-PTI&prod-type=Powercommander%20VPowercommander%20V%20(pressure-temp%20input)
or
350 hours data logging capacity!;
http://store.schnitzracing.com/ecu-flashing-kit-suzuki-gsx1300r-hayabusa-08-12/
Doesn't look like there is one for a 650 sorry;
Tell ya mate to sell that Dinky.
-----------------------------------------------------------------------------------------
Can not see a gsx650f listed anywhere.
http://ecuhacking.activeboard.com/
RE: Dyno recommendations - NSW - kev11e - 04-11-2013
G'day
Gee, if someone knows a dyno joint around Penrith, that might suit us both coz I'd like to go do the tuning thing on my '06.
Regards
Kevin
RE: Dyno recommendations - NSW - pan - 04-11-2013
S&R Pro are at Penrith. I've heard they go alright.
RE: Dyno recommendations - NSW - wayneb60 - 04-11-2013
had work & other stuff done there when I first started to ride always happy with there work Jamie is a good guy
so give him a call 47322203
cheers wayne
RE: Dyno recommendations - NSW - BikerBoy - 04-11-2013
Thanks guys, I'll pass on the info for S&R.
(04-11-2013, 12:11pm)GRUNTMAX Wrote: Most Dynos are not into flashing due to the time it takes.
Nothin like "real time" tuning.
You've only gota work out how to convert the "piggyback PCV map" into an ECU Editor Map.;
http://www.powercommander.com/powercommander/products/powercommanderv/powercommander_v.aspx
http://www.powercommander.com/powercommander/products/AutoTune/powercommander_autotune.aspx
http://www.powercommander.com/powercommander/powercommanders.aspx?mk=21&mdl=180&yr=2009&pc=20-008-PTI&mk-n=Suzuki&mdl-n=GSX%201300%20Hayabusa&pc-ver=PCV&add-mdlyrid=20-00820-008-PTI&add-mdlyrid2=20-00820-008-PTI&fullstr=20-00820-008-PTI&prod-type=Powercommander%20VPowercommander%20V%20(pressure-temp%20input)
or
350 hours data logging capacity!;
http://store.schnitzracing.com/ecu-flashing-kit-suzuki-gsx1300r-hayabusa-08-12/
Doesn't look like there is one for a 650 sorry;
Tell ya mate to sell that Dinky.
-----------------------------------------------------------------------------------------
Can not see a gsx650f listed anywhere.
http://ecuhacking.activeboard.com/
I've come across the piggy-back PCV to ecu-editor before but can't remember if it worked or not, but Justin from Woolich Racing should be able to help out on that one.
Thanks GM.
RE: Dyno recommendations - NSW - Dale - 05-11-2013
I've also heard good things about S&R Pro
RE: Dyno recommendations - NSW - kev11e - 05-11-2013
G'day
Thanks for that - I'll givem a call
Regards
kevin
RE: Dyno recommendations - NSW - simmo - 05-11-2013
Race & Track Moorebank
RE: Dyno recommendations - NSW - pan - 05-11-2013
Mr Hands, Londonderry
RE: Dyno recommendations - NSW - garbo - 08-11-2013
Sportcycles Gateshead (Newcastle) Jamie & Andy 49432030 Mark
