blown low beam

[Landmine]

Blown Low beam changed globe but is a long job to remove fairings and nose cone.
Is there an easy way?

[Greeny_SA]

Gen 1 you can get your hand in there without removing anything & Just change it , Bit Fiddly but Mrs Moshy can do it . Gen 2 ,no idea .

[BikerBoy]

Gen 2, remove the dash panels

[John]

Gen 2, remove the dash panels

Yep remove the dash panels and the cluster, takes about 10 mins to complete.

[ROD]

Gen 2, remove the dash panels

Yep remove the dash panels and the cluster, takes about 10 mins to complete.

Or remove the black cover under the nose 6 push clips

Both ways are easy take your choice

[Landmine]

[/quote]

Yep remove the dash panels and the cluster, takes about 10 mins to complete.
[/quote]

Or remove the black cover under the nose 6 push clips

Both ways are easy take your choice
[/quote]

Thanks sounds a lot easier.
will give it a go.

[BUSGO]

Yep. You probably know by now you just have to take out the black panel below the headlight and have small hands.

[islanddrift]

Take out the dash panel

[Landmine]

Changing the globe was easy after hayabusa community help. Globe from Dealer $67 or after market from dealer $37. Would have been happy to pay but was busy and could not get to buy. In Fact sent the misses but were out of stock had to order. Had a look on line and found H7 55w for $11 delivered to door for 2 and ordered. Was 3 day delivery for 2 Lucas globes so have a spare.
Prefer to support local but its hard at this rate.