Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED
blown low beam - Printable Version

+- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB)
+-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35)
+--- Forum: Hayabusa Gen.II (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=45)
+--- Thread: blown low beam (/showthread.php?tid=18883)



blown low beam - Landmine - 19-04-2012

Blown Low beam changed globe but is a long job to remove fairings and nose cone.
Is there an easy way?


RE: blown low beam - Greeny_SA - 19-04-2012

Gen 1 you can get your hand in there without removing anything & Just change it , Bit Fiddly but Mrs Moshy can do it . Gen 2 ,no idea .


RE: blown low beam - BikerBoy - 19-04-2012

Gen 2, remove the dash panels


RE: blown low beam - John - 20-04-2012

(19-04-2012, 10:48pm)BikerBoy Wrote: Gen 2, remove the dash panels

Yep remove the dash panels and the cluster, takes about 10 mins to complete.


RE: blown low beam - ROD - 20-04-2012

(20-04-2012, 12:51pm)John Wrote:
(19-04-2012, 10:48pm)BikerBoy Wrote: Gen 2, remove the dash panels

Yep remove the dash panels and the cluster, takes about 10 mins to complete.

Or remove the black cover under the nose 6 push clips

Both ways are easy take your choice


RE: blown low beam - Landmine - 20-04-2012


[/quote]

Yep remove the dash panels and the cluster, takes about 10 mins to complete.
[/quote]

Or remove the black cover under the nose 6 push clips

Both ways are easy take your choice
[/quote]

Thanks sounds a lot easier.
will give it a go.


RE: blown low beam - BUSGO - 23-04-2012

Yep. You probably know by now you just have to take out the black panel below the headlight and have small hands.



RE: blown low beam - islanddrift - 23-04-2012

Take out the dash panel BikerBikerBiker



RE: blown low beam - Landmine - 25-04-2012

Changing the globe was easy after hayabusa community help. Globe from Dealer $67 or after market from dealer $37. Would have been happy to pay but was busy and could not get to buy. In Fact sent the misses but were out of stock had to order. Had a look on line and found H7 55w for $11 delivered to door for 2 and ordered. Was 3 day delivery for 2 Lucas globes so have a spare.
Prefer to support local but its hard at this rate.