Posts: 2,010
Threads: 78
Joined: Oct 2007
Reputation:
0
(17-06-2012, 02:19pm)bigjay Wrote: Hey guys what would i need to look for to find a fault with a non working speedo? When the key is turned it moves from 0 to 300 and back so its not the dash. The sensor is tightened in the sprocket cover. All the plugs are where they are supposed to be. I'm at a loss
..... All this from an oil change which is done on the right side of the bike. Go figure!!! By the way, its an 03 busa.
THANKS GUYS
My Instruments stopped working at Tathra last year ( all dead ). Tex disconnected the main battery active & Reconnected it & All the instrument's worked again . No prob's since Gen 1 .
If Wisdom Comes with Age , I'm one of the Smartest Blokes Here
Posts: 5,954
Threads: 98
Joined: Mar 2007
Reputation:
19
You don't have HIDs too do you?
Good weather, good woman, good road, good bike, good-bye!!
No bud, no HIDs'. Tried jamie's from s and r pro and it worked so i bought a brand new one (speed sensor) and now it doesn't. Busa 1 me 0.
12-07-2012, 09:18am
Now, I have gone through 1 x Gen1 & 1 x Gen2 Speed Sensor.
Noticed the 2nd was stuffed just after the dyno @ S @ R.
Looked through the manual to test the sensor with multimeter & found nothing. Wires straight into the combination meter. Had power to the connector when it is switched on. Must be stuffed. New one on order.
Contact Us
Broken down, and "I am a broken man".