Extending wiring loom

[[UNIT]]

Hi

I'm extending my wiring loom to the tip over sensor, air pressure sensor, starter solenoid (not + -) and everything else under the seat!

What guage cable should I be looking for? I don't want to do it by eye as the insulation can vary.

Cheers

[Legend]

Strip back the insulation, the do it by eye....

The sensors shouldn't matter if its a bit thiner or thicker, but as for the start solinoid I'd remove the wire and take it with you, go for a slighty thicker wire if your extending it a significant lenght.

Some of the better electronic shops should carry what your after, except for the colours....

Leonard.

[[UNIT]]

Thanks mate. I'll do that.
Had an idea about chasing looms thru wreckers. I'm sure most of Suzuki use similar plugs. That way I won't change the STD loom. Probably safer

[Camel]

Don't restrict yourself to Busa looms! I've found many late model zooks run the same wires, plugs and even miscellaneous components - like starter relays, TOS, etc. Even scooters!