Who will be next into the 9's???

[CAS3234]

Simmo, get that hugger off and lower her a bit more mate, you have the MPH for 9's.
Do you have a strap for the front?
I have a spacer plate for the top triple clamp that will let you come down another 15mm or so, if you want to use it at the Bracket meet let me know.
You want that front fender up inside the nose

Bruce, have you changed the mounting points for your pipes so you can get lower yet? You can always take your end cans off at the Bracket meets and run open pipes
I have a cut down under tail here, it has no where for the tyre to hit which gives you another 3 inches (no boot), I have also cut it around the rear brake line so it goes on quicker, so you could change it in about 15 minutes, I will bring it over when I pick up my bits from Shayne.

Gazza, all you need is gearing I think, do you have enough sprockets to pick from? I have a bit of a collection here if you need a couple give me a call. <i></i>

[simmo]

Thanks Dave, Bruce gave me some real low dog bones and I already have straps for the front
Will set it up ready for the August meet
will be the 9's maybe all going well only 0.029 to go


Cheers Robert
Aren't all 'busas Copper, the others are just all poor slow copies !!!!!<i></i>

[gazza414]

Thanks Dave, I need more than sprockets to get me into the 9's

Where do I dial in the good luck factor plus really I have time on my side as there needs to be a fair bit more of arse in seat of bike to connect the 2 together...... in other words...I need more practice. <i></i>

[Blackzook]

Thanks Cas I have made the new mounts and had them on last weekend, lowered her as far as she will go without hitting the battery box. I have done everything I can to the bike.

The bike is not the limiting factor here Bruce
N2O no laughing matter
<i></i>