Gen II LHS fairing - Printable Version +- Welcome to The Australian Hayabusa Club Forum - ARCHIVE ONLY VERSION - NEW REGISTRATIONS & POSTS DISABLED (https://www.australian-hayabusa-club.com/MyBB) +-- Forum: Bike Discussions (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=35) +--- Forum: Hayabusa Gen.II (https://www.australian-hayabusa-club.com/MyBB/forumdisplay.php?fid=45) +--- Thread: Gen II LHS fairing (/showthread.php?tid=13296) |
Gen II LHS fairing - Leviathan - 08-09-2009 G'day Guys, I had a phone call from "Rock" today. He is in need of help with the LHS fairing on his LTD K8. Sounds like one of the tabs didn't slot in properly when the fairing was last put on and has now come loose - and has maybe damaged another tab??. Unfortunately I haven't taken the LHS off and couldn't be of any major help over the phone. If anyone can give advice & tips towards removal / re-installation it would be appreciated. Is the LHS much different to RHS removal? I'm going to drop into his place this friday to see if I can help. If any WA members are available on friday, 9:30 - 10:00 in Rockingham area I'm sure Rock would appreciate your help. BTW, I'm posting this up for him as his PC is on the blink. Cheers Troy RE: Gen II LHS fairing - Leviathan - 10-09-2009 Bump RE: Gen II LHS fairing - CarbonBusa - 10-09-2009 (08-09-2009, 07:21pm)Leviathan Wrote: G'day Guys, There is nothing special about the LHS, it comes off the same as the RHS. The trickiest bit is pulling the fairing pin out of the air intake ram tube Ya think the fairing is stuck and are scared of breaking something but it just comes off RE: Gen II LHS fairing - GRUNTMAX - 11-09-2009 (10-09-2009, 11:11pm)CarbonBusa Wrote:Buy some Devcon 2 Part "Plastic Welder" to beef up the plastic spigot mounts where they join the fairing & grease the guts of all rubber grummets. Suzuki's design engineers couldn't afford an extra 1/2 gram of plastic.(08-09-2009, 07:21pm)Leviathan Wrote: G'day Guys, RE: Gen II LHS fairing - Leviathan - 11-10-2009 Just thought I'd mention to the WA gang that Rock & myself consider ourselves competent on this matter now. So if anyone wants some help taking their fairings off just drop us a line. The biggest PITA was getting to the clips that hold the side & nose sections together. |