BigGeorge is in the house!

[BigGeorge]

Hello all!

Just found your forum from a link in my forum... very nice place you have here. A little about myself... I live in the USA and I own a 2006 Busa. Like most of us I've invested a lot into my bike, most of which gives it the canyon carver performance the Busa somewhat lacks from the factory. And I've done a little BLING just for giggles!

Good to be here!

-2006 Busa (black & gray)
-Lowered 1.5" (no lowering links!)
-Pipercross Foam Race Filter
-Short Velocity Stacks
-Small Air Box Mod
-Tsukigi Spec II Race Full Exhaust System
-Dynojet PCIII w/ custom map
-Avon "Storms" 200 rear and 120 front
-Penske Shock: Drag shock with three way adjustable rear shock tuned for sport-riding
-Traxxion: Drag cut front forks re-sprung and tuned for sport riding
-Sprint: Under mount Steering damper
-Cycle-Cat Rear sets
-Puig double bubble screen
-Pazzo Shorty Race Levers
-Royal Purple Max Cycle 10W40
-Rizoma Bar Ends
-Vortex Rear Sprocket
-Trac Dynamics Chrome Lowering Top Clamp
-Canadian Mike Billet Triple Chromed Clutch Cover
-Canadian Mike black Billet Slave Sproket Cover
-PPM Customs Chrome Billet Gauge Bezel
-6000k High/Low HID's
-BlueGauges Reverse Indiglo Gauges
-Clark Customs Triple Chromed Fairing Screens
-Rizoma Prototype Black Billet Mirrors
-Galpher Stainless Steel Clutch and Brake Lines
-Mototech Undertail with 48 LED Upgrade
-Tobin Front and Rear Seats
-Clear Alternatives Red Turn Signals
-Front and Rear Tobin Seats
-Chrome Billet Stator Cover
-Spyder Racing Chrome Billet Grab Bars with Hump Mod
-Pit Stop Chrome Billet Swingarm Plate Relocator
-Vortex Adjustable Side Stand
-ShoGun Frame Sliders
-Gorilla Alarm system with Pager System
-Passport 8500 Radar Detector with H.A.R.D. System

A few photos BEFORE my Canadian Mike billet clutch cover and Rizoma mirrors.









And here's the new Rizoma mirrors.

[DjPete]

You Americans don't do things in halves!
Very nice complete bike BigGeorge.
Something tells me I better not ask why the name Big George!
Like the grab rail and your position for the led alarm light...

[pan]

G'day BigGeorge and welcome.

Looks bling-tastic!

[BigGeorge]

My most decent mod is the Canadian Mike billet clutch cover. I had a friend engrave it with the name I call my bike - Busazilla - and then I had it triple chromed. We used a Dremel tool and a diamond bit to cut the fairing and then cleaned up the cut with black door edge molding.

[BigGeorge]

Thank you pan and Pete.

Very nice complete bike BigGeorge.

I'm thinking about some wave rotors and a new set of wheels next. Not sure just yet.

Like the grab rail and your position for the led alarm light

Thank you. I thought about the places to put the light and that is one of the best places for people to see that the bike is alarmed before they get too close.

Something tells me I better not ask why the name Big George!

Hahahaha. 6'2" and 250lbs = BigGeorge. I'm sure there is a UK conversion for those number but I have no idea what it is right now

[Heidi1]

Glad to see you are wearing pants Big George.

[GlenTC]

G'day George. its a small world. Charlie and I discussed your case this morning. Looks a goer from my end. Nice nav light, is that for tac flying?

[Volvi]

everything but cushion grips, were big into cushion grips downunder (in house joke).

I note those mirrors looks good and seems to extend wider for better view.

onya matey, as we say downunder.

[mybb]

without sponge grips, all other mods are worthless.. search for sponge grips and youll be in for a treat

[bandit]

without sponge grips, all other mods are worthless..

did somebody say sponge grips

[BLACKZOOK]

Hi big fella.
Did you have any problems when plating the clutch cover?? I have the same Canadian Mike cover and was wondering how the two halves would mesh and seal after plating.

[Mutha]

and BigGeorge :ausflag:

In The House

[ROD]

Welcome Big George nice bit og bling you have thare

Can you please Resize your sig Picture to max 100px high

[BigGeorge]

Glad to see you are wearing pants Big George.

I don't get it Heidi. But if you're glad, so am I.

G'day George. its a small world. Charlie and I discussed your case this morning. Looks a goer from my end. Nice nav light, is that for tac flying?

Hey Glen! You're talking about those 3 letter headlights, correct? If so... let's do it! Nav light? I think you're talking about my alarm status light on the tail.

everything but cushion grips

Cushion grips? You guys suffer from a high amount of vibrations in the UK? I'll have to see what you're talking about so I'll be laughing too.

Did you have any problems when plating the clutch cover?? I have the same Canadian Mike cover and was wondering how the two halves would mesh and seal after plating.

Bruce... I didn't have any problems with the seal whatsoever.

Thanks folks for the welcome!

[GlenTC]

I'm on it George. Once Charlie gets into position in CO, we should be good. I have been trying to give him some slack because if his present situation, even though he doesn't take it. Yep, the alarm light. Its amusing.