1 part left over.... Help!!!!!!!

[bigjay]

Hey guys i have almost finished rebuilding my gen 1 but had the misfortune of having 1 part left over. Me being the obsessive SOB that i am, i tried micro fiche websites, suzuki workshop manuals and have come up empty to establish what its for. It seems to be a metal spacer, 12mm high by 16mm across and a 12mm centre. If anyone could help me out, I would be EXTREMELY grateful. Cheers!!!!!!!
   

[Troopmaster]

I dont know GENI's, but is it some form of Neddle Roller Bearing Bush?

[grantxr6t]

Is it out of motor or chassis ?

[bigjay]

its not out of the engine. the engine hasn't been opened. basically the bike is complete minus plastics. so from the frame down is complete so it has to be from there. Neddle Roller Bearing Bush. Not sure. Aren't they ribbed on the inside?

[Greeny_SA]

I'm sure one of the Guru's on here can even give you a part number for it, once they spot this Post .Look's like a Bronze Bush to me .

[gggsxr11]

it looks like the spacer behind the front sprocket going towards the gearbox.

[bigjay]

it looks like the spacer behind the front sprocket going towards the gearbox.

nah the sprocket shaft is heaps wider. the spacers' only 12mm in the centre

[simmo]

Looks like a wheel spacer

[bigjay]

Looks like a wheel spacer

whatever goes thru the spacer its only 12mm wide. i thought rear suspension but thats all checked out

[Rev004]

It wouldn't be a spacer that goes through one of the rubber grommets on one of the plastics ??...but they are normally silver in color so not sure..

Has the oil cooler been off as there is a spacer that goes through the rubber mount ??

[Aussie Steve]

Chuck it away......only kidding....could be a bolt surround/locator for going through a plastic/electronic part but can't help on location

[bigjay]

It wouldn't be a spacer that goes through one of the rubber grommets on one of the plastics ??...but they are normally silver in color so not sure..

Has the oil cooler been off as there is a spacer that goes through the rubber mount ??

all the fairing parts are accounted for and i checked the oil cooler today. it has some grease on it which makes me think its in a high stressed area

---

Chuck it away......only kidding....could be a bolt surround/locator for going through a plastic/electronic part but can't help on location

maybe........ ill check

---

come up empty so far

[Dan85]

Kind of looks like the spacer from the chain side??? Of the rear wheel

[bigjay]

Kind of looks like the spacer from the chain side??? Of the rear wheel

the spacers' only the size of a 5 cent coin. looks like a 12mm thick bolt goes thru it maybe......... there's grease on the inside.

[Greeny_SA]

Have you had it running yet ?