Hi fellows,
i have the idea to install on my '00 BUSA a '02-up ECU (32bit version), for the capability of the 32bit one to be flashed and to have two maps available on run.
has anyone done this?
what do i need other than the ECU?
thank you very much!!!
Lens
Posts: 2,010
Threads: 78
Joined: Oct 2007
Reputation:
0
You need the ecu and an 02 to 07 stator rotor (in magneto). I managed to
get one last wk in aust wrecker's.new suzuki price about $850.00.2nd hand
are rare as hen's teeth. not too many motor's get binned but i got one for
270buck's.look on ebay USA i saw 2 there last week but freight is approx $50
from the u s Happy hunting,i'm doing the same thing.
If Wisdom Comes with Age , I'm one of the Smartest Blokes Here
thank you!!!!
no differences in injector harness or other harnesses???
Posts: 2,186
Threads: 58
Joined: Mar 2007
Reputation:
13
You need to repin a couple of wires at the ecu connector and reverse the polarity of the crank sensor (reverse the wires in the ecu plug)
Can't remember which wires, but there is a big discussion on SuzukiHayabusa.org
thank you very much... i have to choose if swapping or buying a PCIII and its HUB....
Posts: 668
Threads: 46
Joined: Apr 2009
Reputation:
0
im new to the mods...
what does this improve???
GenII Hunter
Posts: 5,303
Threads: 275
Joined: Mar 2007
Reputation:
9
Only what is asked in the first post by lensfare.
A lot of work for very little gain and no point on a road bike.
"If time catches up with you. You're going too slow!"
Regards BUSGO
Posts: 455
Threads: 35
Joined: Jul 2007
Reputation:
0
It gives you the ability to reflash the factory ecu. You can change basicly all the ecu settings. You need to know what your doing and a dyno or you could do some damage. GO to the other busa forums &
http://www.boostbysmith.com/ecu.html for untold info. Leigh
http://www.activeboard.com/forum.spark?f...392256&p=2
Getting ready to make some noise.
Posts: 455
Threads: 35
Joined: Jul 2007
Reputation:
0
08-04-2009, 07:59am
(This post was last modified: 08-04-2009, 08:02am by lee8sec.)
The postman just delivered my ecu & rotor.
They are getting hard to get at the right price. Leigh
Getting ready to make some noise.
Posts: 668
Threads: 46
Joined: Apr 2009
Reputation:
0
hmmm... well any work i do on my bike, i ask Jamie at S&R Pro first.
he usually has an idea if im wasting my time.
one thing. running four short stacks, better than running two short, two long??????????
GenII Hunter
Posts: 455
Threads: 35
Joined: Jul 2007
Reputation:
0
Just fitted my ecu & rotor, repinned harness. Started staight up. Leigh
Getting ready to make some noise.
Posts: 455
Threads: 35
Joined: Jul 2007
Reputation:
0
Reflashed it today, still runs. Now of to the dyno to check. Leigh
Getting ready to make some noise.
Contact Us
