Login

**revhead** · (This post was last modified: 21-12-2012, 05:29pm by revhead.)

(21-12-2012, 09:26am)davegc Wrote:
(20-12-2012, 10:02pm)revhead Wrote: the rules for n.s.w are if your tail ,or bobber is the same or shorter then your rear axle a hugger is required ,been throw it with the rta,and the cops ,trust me im spot onwith n.s.w regs as i build my own fighters!

Here's the rules:

http://www.rta.nsw.gov.au/registration/d.../vsi28.pdf

Dave i like the post and the link ,but everytime ive registered a streetfighter ,the rule ive stated is what the inspecting officers tell me, is the rule ,ive been stopped by many a hwy patrol and theyve said or done nothing about my bikes , Yes

**revhead** · 21-12-2012, 08:23pm

(21-12-2012, 05:27pm)revhead Wrote:
(21-12-2012, 09:26am)davegc Wrote:
(20-12-2012, 10:02pm)revhead Wrote: the rules for n.s.w are if your tail ,or bobber is the same or shorter then your rear axle a hugger is required ,been throw it with the rta,and the cops ,trust me im spot onwith n.s.w regs as i build my own fighters!

Here's the rules:

http://www.rta.nsw.gov.au/registration/d.../vsi28.pdf
Dave i like the post and the link ,but everytime ive registered a streetfighter ,the rule ive stated is what the inspecting officers tell me, is the rule ,ive been stopped by many a hwy patrol and theyve said or done nothing about my bikes ,

ok dj pete your old busa is off to its new home in sydney, it now has my fuel tank which i painted up today to match the old plastics ,it has my old motor ecu and wiring fitted
[Image: 230211_3948184035206_1563441424_n.jpg]

[Image: 230211_3948184035206_1563441424_n.jpg]

21-12-2012, 08:45pm

:-( Bye old friend....

**revhead** · (This post was last modified: 27-12-2012, 04:20pm by revhead.)

(21-12-2012, 08:45pm)DjPete Wrote: :-( Bye old friend....

ive given my bike a name ,as it has given me nothing but grief since i bought it,i was going to paint it yellow and call it lemon Busa ,but i thought the name i chose was very good ,not the number plate the frame ,if anyone wantsone any colour any logo, i can put you in contact with the maker,enjoy
[Image: 61028_3972794690457_1413035236_n.jpg]

[Image: 61028_3972794690457_1413035236_n.jpg]

**revhead** · 31-12-2012, 04:24pm

(16-12-2012, 10:26pm)Madmax Wrote: Excellent

today i went and built myself a brake/ clutch fluid res to mount between my bars,it is baffled ,i just need to add 2x outlets then its done Coolsmiley

[Image: 574941_3989403065656_1543355559_n.jpg]

**revhead** · (This post was last modified: 14-01-2013, 03:46pm by revhead.)

ok having problems with the right hand blinker not working ,so i pulled the harness out of the bike,found nothing .so i wired in resistors for led blinkers , yes the blinker can is brand new,so i
re-taped it ,put it back in ,still right hand blinkers come on but refuse to flash,i also notice the airbox,wouldnt flip open when being revved,so i checked the airlines ,and found they were around the wrong way ,so i swapped them over and found more horse power Idiot2

,instead of lifting the front wheel it wheel spins as well Scary

**revhead** · (This post was last modified: 22-01-2013, 07:33pm by revhead.)

[Image: 545256_4091233611356_238213562_n.jpg]

right took the shitta out the back-yard today for some up dated piccis ,
[Image: 529034_4091193890363_130509571_n.jpg]

**revhead** · (This post was last modified: 29-01-2013, 08:35pm by revhead.)

ok i have repainted the tank and fitted a new led twin round taillights,and gave it a really good clean today ,
[Image: 734389_4126276327402_1782330470_n.jpg]

[Image: 734389_4126276327402_1782330470_n.jpg]

**revhead** · (This post was last modified: 09-02-2013, 04:56pm by revhead.)

ok things have changed im going to put my baby back together ,ive almost finished with the rebuild of my left butt cheek ,7 days on i feel much better if all goes to plan itl be 2 weeks im riding my baby again
[Image: 222611_4229052576744_1875425760_n.jpg]

[Image: 222611_4229052576744_1875425760_n.jpg]

10-02-2013, 12:45pm

Great to heat revhead. Hope everything comes back together again

**revhead** · 15-02-2013, 07:22pm

(10-02-2013, 12:45pm)DjPete Wrote: Great to heat revhead. Hope everything comes back together again

ok guys heres were im up to ,got the tank off today and bashed out a few dings ,as finding a tank is becoming a joke,
[Image: 521411_4264159134386_2038194429_n.jpg]

[Image: 521411_4264159134386_2038194429_n.jpg]

and in bare metal
[Image: 19785_4264781509945_1456267623_n.jpg]

ive straightened the side stand ,by pressing it straight
ive bought n fitted a left hand footpeg mount
also bought a stator cover and new handle bars

15-02-2013, 07:34pm

whoohoo...slowly slowly.
:-)

**Batfink** · 15-02-2013, 07:34pm

Careful with that stand mate... It holds up about 200kg and as soon as metal is stressed (bent) it looses a lot of integrity. Not saying anything is wrong but I would never reuse a re-bent stand for my bike

**revhead** · 15-02-2013, 08:09pm

(15-02-2013, 07:34pm)Batfink Wrote: Careful with that stand mate... It holds up about 200kg and as soon as metal is stressed (bent) it looses a lot of integrity. Not saying anything is wrong but I would never reuse a re-bent stand for my bike

ok good call il hit up ebay then or make my own.thanks for the heads up,couldnt handle fixing another busa tank,lol Clap

**BikerBoy** · 15-02-2013, 08:27pm

(15-02-2013, 07:22pm)revhead Wrote: ok guys heres were im up to ,got the tank off today and bashed out a few dings ,as finding a tank is becoming a joke,

might set ya back $300 ish but they are around. found in less than 2min.

http://www.ebay.com.au/itm/1999-2002-SUZ...33716456e8

http://www.ebay.com.au/itm/SUZUKI-GSX-13...2ebd17fca8

http://www.ebay.com.au/itm/99-00-Suzuki-...3f21799d21

http://www.ebay.com.au/itm/2002-SUZUKI-G...5d37dbcec5

Login
Username:
Password:	Lost Password?
	Remember me