lowering Links? Or stock lowering adjustment? Opinions please

[De5nake]

I'm lowering and streaching my bike should I use the stock adjustments for lowering?or install lowering links

[sutur]

Soupy does cheap adjustable lowering links. You could also cut the springs a little to get it clean even.

I was going to do it after I saw how awesome it makes a busa look...but it ruins the handling apparantly - and that's a lot more valuable.

Although...you did say you were stretching it too lol

[De5nake]

Yea I want to stretch 4" and put a 200 rear tyre on it, trying to give the rear end a fatter low rider look and the stretching will make the rear tyre line up with the point of the tail so it fits to the length of the bike, not to fussed bout handling, supercharger kit and PC5 come next, im all about strait line!

[BikerBoy]

If ur into straight line, you'll be interested in.

http://www.schnitzracingstore.com/catalo...ory=309448&count=1

There's a few members here that are very experienced and crazy quick on the 1/4 so you'll be able to get some good advice when needed.

also don't bother with a pc5. The stock Busa ecu can be flashed and does it all with a heap of extra features and tweaks......much cheaper too.

[sutur]

also don't bother with a pc5. The stock Busa ecu can be flashed and does it all with a heap of extra features and tweaks......much cheaper too.

+1 on that, most people around here have chosen that path, myself included

[big kev]

i have a st of 1" - 3" lowering links you can have if ya like there black an have HAYABUSA on them

[De5nake]

Wow thanks for the help guys! I love this club already! And kev I'd be interested in buying your lowering links, where a bouts are u located? And who do u guys recommend to tune the stock ecu?

[sutur]

The user "Maj" is supposed to be the guru in VIC. Not sure if he's still active though?

[big kev]

Wow thanks for the help guys! I love this club already! And kev I'd be interested in buying your lowering links, where a bouts are u located? And who do u guys recommend to tune the stock ecu?

nah you can have em for free dude , speak to petes pitstop hes on here hes the best

[BikerBoy]

To flash the stock ecu, speak to Pete (member FasterFaster). he runs the shop http://www.petespitstop.com.au/
He's a long way away from us, but you can post him your ecu and he'll send it back when done. Lot's of members here have got nothing but good comments about his work. He definately knows his stuff!!

...or you can learn yourself and go the DIY way by purchasing the flashing harness from http://www.boostbysmith.com/ecugen2.html
and downloading a copy of ecueditor from http://ecueditor.com/
there is a full forum about it all here: http://ecuhacking.activeboard.com/forum....umID=99460

...and to keep you locked in the saddle while accelerating, speak to member Big Kev (posted above) about his custom seats http://www.vcmcycleseats.com.au/ Again, many of us have them and kev does a great job for us all.

[De5nake]

A seat is something I'm deffinately gunna look into, as much as I love the feeling of getting thrown back into the hump I'd love that extra support, I'm only on my iPhone ATM so I'll wait till get home to check the site out, it requires flash. I'll look into Petes pitstop as the only place I kno is dynoverks, who did the work on my gsxr 600 but I had ignition problems after pc was fitted, and I really don't want anything goin wrong with the busa

[sutur]

the only place I kno is dynoverks

I know that place! Dean is a top guy

[De5nake]

Wow thanks for the help guys! I love this club already! And kev I'd be interested in buying your lowering links, where a bouts are u located? And who do u guys recommend to tune the stock ecu?

nah you can have em for free dude , speak to petes pitstop hes on here hes the best

Seriously? That's awesome, there's gotta b something u need, that I mite have? To trade?

[BikerBoy]

Dynoverks can go to hell as far as I'm concerend. I got nothing but f****d around by 'Deano'.
I gave up with the bullshit excuses that were dribbling out of his mouth. I'll never set foot in there again!!!

A better choice for Dyno and engine work that is local to us is Phil Tainton Racing over on Stud Road.
http://www.ptr.com.au/ptr_location_map.htm

[sutur]

Dynoverks can go to hell as far as I'm concerend. I got nothing but f****d around by 'Deano'.
I gave up with the bullshit excuses that were dribbling out of his mouth. I'll never set foot in there again!!!

A better choice for Dyno and engine work that is local to us is Phil Tainton Racing over on Stud Road.
http://www.ptr.com.au/ptr_location_map.htm

What happened?