Busa Respray Costs ??

[DAVE01]

maybe 150GRITT is too harsh to start with but thats what I'v used- too remove that layer of arisoll paint -

all pannels
busa all + gsxr 600 tail + gsxr 1000 tail = more to paint
it's only taken two weeks so far - off n on in the arvo after work

mate 240 dry would be better or atleast go over it with 240 and then 320 before priming other wise it will more than likely shrink back later [sanding marks coming through from underneath ]
a 3mm oscillating sander would be money well spent,great for both sanding the old paint off,great for rubbing the primer and also the best for color sanding the clear coat before buffing.
Good luck if you need any tips you can pm me and i'll try to help

[Dale]

maybe 150GRITT is too harsh to start with but thats what I'v used- too remove that layer of arisoll paint -

all pannels
busa all + gsxr 600 tail + gsxr 1000 tail = more to paint
it's only taken two weeks so far - off n on in the arvo after work

mate 240 dry would be better or atleast go over it with 240 and then 320 before priming other wise it will more than likely shrink back later [sanding marks coming through from underneath ]
a 3mm oscillating sander would be money well spent,great for both sanding the old paint off,great for rubbing the primer and also the best for color sanding the clear coat before buffing.
Good luck if you need any tips you can pm me and i'll try to help

Cheers .. .. I'll look into one

[RYDRZ]

.............................