Hi guys,
I originally tacked this question onto an older thread, but due to lack of response, I will start a new thread.
I bought a 2nd hand GI Pro / ATRE gizmo but it has no wiring diagram. I gather the two plugs just plug in somewhere and the red wire must be for power, but I don't want to "play" and wreck my bike. If anyone has a diagram they can copy and send me it would be much appreciated.
To be totally honest I am not 100% sure it is for my bike. I may have just gathered it was for a gen1 when I bought it. Is there some way I can tell ??
Thanks in advance guys ..
Dale
Posts: 938
Threads: 34
Joined: Feb 2010
Reputation:
14
Hey Dale if it wont fit your Gen2 I might be interested...I have the best Busa...a Gen1!!
Smoke me a kipper I'll be home in time for breakfast
Posts: 2,010
Threads: 78
Joined: Oct 2007
Reputation:
0
(18-05-2011, 11:10am)Aussie Steve Wrote: Hey Dale if it wont fit your Gen2 I might be interested...I have the best Busa...a Gen1!!
Dale , what you need for your 2001 is a gipro S01/S02. I have a copy of the installation & operation instructions. If You send me a Fax No I'll send you a copy of both . If you can't get something off the net give me a call
0418-841 783.
If Wisdom Comes with Age , I'm one of the Smartest Blokes Here
Posts: 938
Threads: 34
Joined: Feb 2010
Reputation:
14
Bugger I thought he had a Gen2...bugger
Smoke me a kipper I'll be home in time for breakfast
Posts: 387
Threads: 28
Joined: Dec 2008
Reputation:
0
No worries Dale, Greeny PM sent
Isn't it Ironic that my Favourite Stretch of Tarmac is called
C.O.P. 
Posts: 5,823
Threads: 401
Joined: Mar 2007
Reputation:
36
It would have to be for a gen 1 as they would not have made a Gi for a gen 2 as gear ind is standard on gen 2 .
lift tank and at rear of tank left lide you will see 3 pin plug to unclip and conect to your gi pro then red whire to positive of battery
![[Image: Resizeofbusa005.jpg]](http://i47.photobucket.com/albums/f175/HAYABUSA-ROD/Resizeofbusa005.jpg) |
REGARDS ROD
MOBILE 0433 92 99 22
kangaroos1996@msn.com |
Posts: 2,010
Threads: 78
Joined: Oct 2007
Reputation:
0
(18-05-2011, 11:16pm)ROD Wrote: It would have to be for a gen 1 as they would not have made a Gi for a gen 2 as gear ind is standard on gen 2 .
lift tank and at rear of tank left lide you will see 3 pin plug to unclip and conect to your gi pro then red whire to positive of battery
What Rod said is correct re plug's under the left side with tank up .There are 2 x White triangular connectors with 3 pins in them .The one you want is .From memory ( Check ), The one coming from the main loom where one of the 3 wires is Pink . Or give me a call tomorrow mate & I'll Explain . 0418 841 783. After 9-30 am .
If Wisdom Comes with Age , I'm one of the Smartest Blokes Here
Contact Us
