Fake Pazzo's

[Remsta]

"So it just comes down to personal choice And i will add my hands are like a 90 year old bloke"

Could it be RSI from excessive master bation?

[ROD]

"So it just comes down to personal choice And i will add my hands are like a 90 year old bloke"

Could it be RSI from excessive master bation?

no your missus looks after me in that area

[1300hayabusa]

. your hand lever is being attended too Rod?????

[simmo]

Let's make it very clear that the comment about the fakes was not targeted at fasterfaster. I have not seen his product, therefore cannot comment. As said earlier, the post was not aimed at any vendor on this forum.
Have absolutely no idea what is meant by 'convenient for some'

To explain ................. less vendors on the board means less competition which would suit some vendors ie convenient for some I would imagine. Did not take the post aimed at me in anyway was simply stating that a set had been donated and if some one wished to give them a wack with a hammer no probs here In saying that I think I had posted earlier re the copies that I think there are copies and copies from what I have seen on flea bay ? Some copies may be good and others bad I think Simmo or some one else may have had a set that broke in use ?
Remsta the Polemicist is just doing what a Polemicist does ............... he just doesn't do it very well is all and it would probably be best if he found a new platform to practice honing his skills

Cheap Leavers front or even rear will one day give you trouble I have snapped both off in the past, Pan had a front one snap off at the drags I think it was once, if you want to stop in a hurry its not the time you want it to snap off

[Macbusa]

untill i see factual proof that they are dodgy then the thread is just a bunch of shit , you have a supplier on here bagging the f*** out of a product , he has a vested intrest in this thread as he sells a similar product him self , hes not once put up and evedience to prove his post holds water

sorry been away for 5 days... abit late on entry.

Best thing writen here.

We have a seller bagging fake pazzos but no picture evidence.. where are these levers you 'bought' and tested and tried or whatever to see if they were cast alloy.

If i was so big on 'helping out' i'd post pics to support my accusations....

This thread is nothing more than a 'pazzo seller' trying to 'put off' buyers of a product similar to pazzos.

to add.... the OEM levers on the busa are probabliy made in china..

This thread is worthless without pics, sellers name the product come from and some sort of 'proof of testing'

And Rainbow.... I think you got some hidden agendas that you need to come clean...

[amcmo]

untill i see factual proof that they are dodgy then the thread is just a bunch of shit , you have a supplier on here bagging the f*** out of a product , he has a vested intrest in this thread as he sells a similar product him self , hes not once put up and evedience to prove his post holds water

This thread is nothing more than a 'pazzo seller' trying to 'put off' buyers of a product similar to pazzos.

This thread is worthless without pics, sellers name the product come from and some sort of 'proof of testing'

And Rainbow.... I think you got some hidden agendas that you need to come clean...

Macbusa - Along with several others, you're full of shit!

Perhaps read all the posts again - even Pete who everyone claims is one of the best vendors on the forum admitted he has seen some crap ones.

I don't sell Pazzo's, just posting a caution based on what we found.

I really don't give a shit about demands to see pics of the product. If you can't accept a comment without demanding a world of proof - would you demand it if Pete or Kev had said it? - Hang on - Kev was one fo the first to jump in and bag shit out of me.

In fact I've had a gut-full. If it doesn't fit with your view of the world you bag the hell out of the poster.

MadMax, sorry, I'll post it publicly so there's no uncertainty about it. Cancel our donation to the Tathra Charity Raffle.

For the guys who've already contacted us, and those who've already dealt with AMC and communicated, feel free to phone any questions or orders through, discounts will be honoured.

Other than that, I'm out of here.

[kawasuki]

Let's make it very clear that the comment about the fakes was not targeted at fasterfaster. I have not seen his product, therefore cannot comment. As said earlier, the post was not aimed at any vendor on this forum.
Have absolutely no idea what is meant by 'convenient for some'

To explain ................. less vendors on the board means less competition which would suit some vendors ie convenient for some I would imagine. Did not take the post aimed at me in anyway was simply stating that a set had been donated and if some one wished to give them a wack with a hammer no probs here In saying that I think I had posted earlier re the copies that I think there are copies and copies from what I have seen on flea bay ? Some copies may be good and others bad I think Simmo or some one else may have had a set that broke in use ?
Remsta the Polemicist is just doing what a Polemicist does ............... he just doesn't do it very well is all and it would probably be best if he found a new platform to practice honing his skills

Cheap Leavers front or even rear will one day give you trouble I have snapped both off in the past, Pan had a front one snap off at the drags I think it was once, if you want to stop in a hurry its not the time you want it to snap off

Simmo they weren't Pazzo replica .

[islanddrift]

[amcmo]

Stewed a bit more on this shit. As Volvi hasn't closed my membership yet, I'll lob one further parting shot.

Per previous, I'm not about to show anyone (especially competitors) how we test. I could show you pics of dissected levers, but then there's probably only one or two of you if that (and certainly none of those spouting the absolute crap against my original post) who could see from a photo anything other than yes, they are aluminium or something that looks like. Proof that we tested - want a pic of 12 or 13 sets of levers - again what are any of you going to get from that, other than yes, we do have a few sets of levers sitting on a bench.

I haven't taken macro pics of the adjusters hitting bolts or the non-square holes, again all you could see is that, yes they do have holes drilled in them at the factory, and adjuster levers. Going to run a micrometer across the pics to try for proof or otherwise - stop wanking!

So those amongst you demanding picture proof - why should I bother posting something you're incapable of forming any logical opinion from.

We test product for our own benefit and decision making not yours.

I posted a general caution based on what we found. If you're too focused on trying to shoot down anyone that doesn't fit your view of the world to accept it was just that, a cautionary note, then I've got better things to do than keep company with you.

To those who contacted expressing support, and those who posted with a little reason, this rant is not targeted at you, and you'll always receive a good price and (hopefully) good service if you mention the club.

Sorry, you just have a few absolute ...(insert your own description here) in your midst that do the club's name no favours.

Now out of here...

[kawasuki]

Stewed a bit more on this shit. As Volvi hasn't closed my membership yet, I'll lob one further parting shot.

Per previous, I'm not about to show anyone (especially competitors) how we test. I could show you pics of dissected levers, but then there's probably only one or two of you if that (and certainly none of those spouting the absolute crap against my original post) who could see from a photo anything other than yes, they are aluminium or something that looks like. Proof that we tested - want a pic of 12 or 13 sets of levers - again what are any of you going to get from that, other than yes, we do have a few sets of levers sitting on a bench.

I haven't taken macro pics of the adjusters hitting bolts or the non-square holes, again all you could see is that, yes they do have holes drilled in them at the factory, and adjuster levers. Going to run a micrometer across the pics to try for proof or otherwise - stop wanking!

So those amongst you demanding picture proof - why should I bother posting something you're incapable of forming any logical opinion from.

We test product for our own benefit and decision making not yours.

I posted a general caution based on what we found. If you're too focused on trying to shoot down anyone that doesn't fit your view of the world to accept it was just that, a cautionary note, then I've got better things to do than keep company with you.

To those who contacted expressing support, and those who posted with a little reason, this rant is not targeted at you, and you'll always receive a good price and (hopefully) good service if you mention the club.

Sorry, you just have a few absolute ...(insert your own description here) in your midst that do the club's name no favours.

Now out of here...

What was the gift voucher going to be before u pulled out of the raffle
for the Camp Quality kids????? ( i am sure they wouldnt be happy)

[Macbusa]

MadMax, sorry, I'll post it publicly so there's no uncertainty about it. Cancel our donation to the Tathra Charity Raffle.

holey shit !!!!!! amcmo... thats a bit much isn't it.... i asking for pics of your 'tests'... no need to fly off the handle and cancel your donations to the hayabusa club.

To make sure our members don't miss out, I got a few bling busa parts i'll donate in lieu of amcmo removal of donations..

Brand new 2 x billet rear reservoirs i'll donate. 1 x Anodised blue, 1 x red. Brand spankin new, never fitted, sitting on shelf collecting dust. Same as Rated R billet reservoirs.

Sorry Max, seems some members aren't as loyal in the club :(

[Madmax]

Hi guys,

Will someone tell me what just happened please? Let's not make the kids at Camp Quality pay for some personal asides here people? This is a fairly robust club where after the flinging of garbage we all manage to kiss, hug and make up afterwards. Let's keep it on the level a bit.

Grant, no need to feel the need to make donations on Rob's part mate, this is his decision not yours. I'm just a little shocked he reacted so strongly. A bit of a shame.

On the other hand - How many sleeps till we hit TATHRA!!!! Yahoooo, I feel sad about the guys who can't make it, we'll have a drink or three on your behalf!!!

[Macbusa]

Max... I'm doing this for the kids... consider my donation offical.

Heres a pic of what the lucky winners get...

[ROD]

Hi guys,

Will someone tell me what just happened please? Let's not make the kids at Camp Quality pay for some personal asides here people? This is a fairly robust club where after the flinging of garbage we all manage to kiss, hug and make up afterwards. Let's keep it on the level a bit.

Grant, no need to feel the need to make donations on Rob's part mate, this is his decision not yours. I'm just a little shocked he reacted so strongly. A bit of a shame.

On the other hand - How many sleeps till we hit TATHRA!!!! Yahoooo, I feel sad about the guys who can't make it, we'll have a drink or three on your behalf!!!

Not sure Max but i did not go anywhere near his missus

[amcmo]

This is the private message received.

Hi Max,

I've said it publicly, please cancel the donation to the charity raffle.

I've had enough of some of the shit.

If you ever need any special pricing or other, just drop me a line robertr@amcaustralia.com

Regards
Rob

That's a shame Rob, where did you say that? Are you sure you want me to tell the guys that??? You put a $25 voutcher up last year, which I bet the winner deeply appreciated. What shit have you had enough of? Is there something the club has done to stop you feeling part of the Tathra charity raffle?

There has been no pressure on you to donate anything Rob, just say "No thanks" and don't feel you have to try to justify backing away from contributing to young children who are suffering from Cancer.

Regards.


Max

On 9th Nov I sent a $150 voucher to you for this year's raffle, which is now cancelled.

The crap that has been thrown on the Fake Pazzo thread where I made the public statement withdrawing the donation, has been the final straw. I have no desire to reward the likes of Kev and his mates with free product.

There's no justification involved and don't bother suggesting otherwise!

My response above to a personal message

My FINAL statement on this matter...

I made a statement of caution based on the results of my evaluation of a number of different sources for levers. Not saying buy my product (which I don't have) or anyone else, just suggesting caution.

4 pages of posts later, mostly devoted to attacking my integrity, and you accuse me of not being loyal.

DO NOT BOTHER SENDING ANY MORE PERSONAL MESSAGES, i've turned off the email notification and will not be responding further.

This was immediately attacked by