Drags @ Eastern Creek
Hey Guys
How strictly do they police the "10.5 and under go get an andra licence " at the wed night meets.
I may be in Syd for the 28th. <i></i>
Reply
You should be right Maj, lately they have been letting them finish the night but they warn the riders to get a licence for the next time they come out.


Dave <i></i>
Reply
Thanks Dave
I feel better about making the effort to get the bike there if i can get a few runs in. <i></i>
Reply
Bruce,

The run that I wheelied was a 9.3 your run must have been something special.!!!!

All the rest were wins.


Maj, yes they are pretty strict on the 10.5 rule especially if you run a 10.0 or less. 10.4 might see you through.

Leonard.
<i></i>
Reply
Last time out was running 10.1 10.0 dropping a cyl , usually hi 9's.
I'm taking the family to do the tourist thing , kids havent been to see the opera house or bridge , so if i lug the bike all that way i'd like to get some use of it.
Looks like i will be a week late for a good show as it is.
<i></i>
Reply
Blackkat dont worry about bwuce I think he is still smoking
Cheers,
Kawasuki<i></i>
Reply
I'm out for the 21st. Dropped off the bike at Mototech today for some touch-up work and due to get it back on the 22nd...

Just as well though. I had the BTL welded recently, and was looking at doing mid 8's from the mid 11's I had been doing!

Now that I know you need an ANDRA licence to run those sort of times, I'll just make sure I'm slower next time...
"sometimes, crime does pay"

Customer Service & Complaints Division
Easyrider Imports
www.easyriderimports.com.au

<i></i>
Reply
I'm still in who else

yep you better back it off a bit Pan
Cheers Robert
World Wide CEO
Easyrider Imports
www.easyriderimports.com.au
<i></i>
Reply
Went past the creek today and there were a big bunch of miserable top fuellers in there. It's pissing down, therefore no drags.

Regards
Graham
1hotBUSA
2000 Suzuki Hayabusa Red/Grey Bog standard except for bling and a kanooter valve. Oh and a turbo kit on the floor.
Strike a blow for freedom...Smash a speed camera!!!
Red Bikes Rule!!!!!<i></i>
Reply
Hoping the weather will be kind on Wednesday!!!!

Will be looking forward to some fast fun!!!!!!!!!!



"BLUE and SILVER BLING is the BEST THING!!!!"

Andrew :)<i></i>
Reply
Hey just for your information a few of our guys are running this weekend. I know Blackkat is there, I guess CAS will be there too. Good luck guys!! Regards
Graham
1hotBUSA
2000 Suzuki Hayabusa Red/Grey Bog standard except for bling and a kanooter valve. Oh and a turbo kit on the floor.
Strike a blow for freedom...Smash a speed camera!!!
Red Bikes Rule!!!!!<i></i>
Reply
Flippers is all they will need tonight
Cheers Robert
World Wide CEO
Easyrider Imports
www.easyriderimports.com.au
<i>Edited by: simmo at: 16/9/05 10:52 pm
</i>
Reply
Yeah Leonard and I are out there.

Jamie Bezzina (S and R Pro) top qualified with a 8.6second pass (not quiet up to your standard eh Pan)
He then came back to our pit bay drained the oil and found bits of bearing all through it, so he is out for the weekend.

Leonard was second fastest (now fastest) with a 8.8.

A guy called Dave Wolf from QLD is 3rd fastest, he has a ZX12 with a big bore kit, I think it is a 1470cc, (no NOS or turbo) ran a 8.9

I have qualified in 11th place with a 10.20, this may look slow but I have to run as close as possible to a nominated time, so I am trying to be consistant. All my runs have been within 3 one hundreds of a second, which is pretty consistant.

I am not sure if you know Alex Borg, he is building a turbo Busa, He is riding Snake's bike (the other half of S and R). It is a GSX1400 turbo, he has qualified in 10th place with a 10.0.


Dave <i></i>
Reply
Dave the Muzzy bike is not turbo. Hi s fuel played up on his last run, I hope you all do well Sunday I will be there watching
just to see no one is cheating. Cheers,
Kawasuki<i></i>
Reply
Good luck with it Dave.

No, the times are not quite up to my standard, but "all good things to those who wait"
"sometimes, crime does pay"

Customer Service & Complaints Division
Easyrider Imports
www.easyriderimports.com.au

<i></i>
Reply




Users browsing this thread: 1 Guest(s)