Contact Us
20-03-2007, 04:14am
This is what it looks like threw the port.
Ive tried them all and hads Down when I set out to make my Nitrous Plate System I went to Mark and now I have a Bolt on package that is hard to Beat,BOLT ON POWER!!!!!
That is a totally sick setup bloke.  I did similar with one of my old kwaks, 27 years ago.  I got serious horsepower, incredible induction noise, and f****d bores after 20k with no filters at all.  Are you going to wrap your airbox back around those stacks or is what we see what they are going to be?
Max:smiley:
busa::smiley
This Nitrous system is set up for Racing ONLY!! Pro Street, Super Street and OUTLAW!!! And Im Setting up a Few for Grudge Racing.
Now I will have a Set up for the Stock air Box,There will be a Stainless Lid to replace your airfilter lid.
There will be a 6inch Blow off disk Built into the lid also there will be FLOW Rite Filters going between the airbox and the Ram Tubes.
This Nitrous System is set at 36psi of fuel pressure and Im working on a NEW fuel Nozzle that will be set at 70psi at 50 Micron.
The Solenoids can be set from 25 Hurtz to 40 Hurtz also the seat height of the Plunger can be set for 50HP to 250HP.
This Nitrous System is Bench tested and Flowed and PRE-PLUMBED< Also this is the only Nitrous system that can be set at 100HP at 40Hurtz and be Progressed at a TRUE 10%.
Our shower Heads are the only Disterbution Blocks that flow Exactly the same out of every hole 15ML over a 10 sec time frame.
The inside of the Hoses ,Shower Heads and the Nozzles are the same ID for less Faze Change.
[/quote]
That's an incredible idea - build an airbox around the setup you have there.  I wonder if Col (10 10ths) has thought of this?
Max:smiley:busa::smiley:
Ive tried them all and hads Down when I set out to make my Nitrous Plate System I went to Mark and now I have a Bolt on package that is hard to Beat,BOLT ON POWER!!!!!
That is a totally sick setup bloke.  I did similar with one of my old kwaks, 27 years ago.  I got serious horsepower, incredible induction noise, and f****d bores after 20k with no filters at all.  Are you going to wrap your airbox back around those stacks or is what we see what they are going to be?
Max:smiley:
busa::smileyThis Nitrous system is set up for Racing ONLY!! Pro Street, Super Street and OUTLAW!!! And Im Setting up a Few for Grudge Racing.
Now I will have a Set up for the Stock air Box,There will be a Stainless Lid to replace your airfilter lid.
There will be a 6inch Blow off disk Built into the lid also there will be FLOW Rite Filters going between the airbox and the Ram Tubes.
This Nitrous System is set at 36psi of fuel pressure and Im working on a NEW fuel Nozzle that will be set at 70psi at 50 Micron.
The Solenoids can be set from 25 Hurtz to 40 Hurtz also the seat height of the Plunger can be set for 50HP to 250HP.
This Nitrous System is Bench tested and Flowed and PRE-PLUMBED< Also this is the only Nitrous system that can be set at 100HP at 40Hurtz and be Progressed at a TRUE 10%.
Our shower Heads are the only Disterbution Blocks that flow Exactly the same out of every hole 15ML over a 10 sec time frame.
The inside of the Hoses ,Shower Heads and the Nozzles are the same ID for less Faze Change.
[/quote]
That's an incredible idea - build an airbox around the setup you have there.  I wonder if Col (10 10ths) has thought of this?
Max:smiley:
busa::smiley:
Good weather, good woman, good road, good bike, good-bye!!