Contact Us
18-12-2001, 11:02pm
Peoples....
To remove the stickers off the bike you'll need a Heat Gun on a low setting, some Prepsol or a similar wax or grease remover, and a Broken Hacksaw Blade. The hacksaw blade should be snapped off to about 4-5 inches long, ground to a chisel-like point a one end, and the rest of the blade of about 3 inches should be wrapped up in many layers of masking tape/gaffa tape as palm cushioning.
Slowly heat sticker until becomes warm, dab Prepsol on rag onto sticker around edges to let it seep underneath, and carefully scrape sticker off with my tool being almost parrallel to surface to avoid digging in. If sticker gets hard, apply more heat......very simple.
Trust me - it works. When I have to scrape dead bugs and birds off the aircraft windows and leading edges after the aircraft hit them at 400km/h or more, my method works most of the time!!
Enjoy, Peter
To remove the stickers off the bike you'll need a Heat Gun on a low setting, some Prepsol or a similar wax or grease remover, and a Broken Hacksaw Blade. The hacksaw blade should be snapped off to about 4-5 inches long, ground to a chisel-like point a one end, and the rest of the blade of about 3 inches should be wrapped up in many layers of masking tape/gaffa tape as palm cushioning.
Slowly heat sticker until becomes warm, dab Prepsol on rag onto sticker around edges to let it seep underneath, and carefully scrape sticker off with my tool being almost parrallel to surface to avoid digging in. If sticker gets hard, apply more heat......very simple.
Trust me - it works. When I have to scrape dead bugs and birds off the aircraft windows and leading edges after the aircraft hit them at 400km/h or more, my method works most of the time!!
Enjoy, Peter