Back torque limitor mod.

[Volvi]

Col, could you add your comments to this thread that appeared on another board.

Author Topic: clutch/back torque limitor
OzzieBusa
NEW MEMBER posted 12-10-2000 07:51 AM
--------------------------------------------------------------------------------
Interested in having my clutch/back torque limitor modified to enable dragging without fear of stalling. I believe it's done just by doing a four spot weld on the face to stop the inner ring.
Any comments? anyone done it? is it worthwhile doing?

IP: Logged

Frank Adams
NEW MEMBER posted 12-10-2000 08:09 AM
--------------------------------------------------------------------------------
In order to have any welding done with your clutch piece, it would need to be done in a jig.
*THERE IS OTHER OPTIONS.

Option 1
All billit no welds.


Option 2
Out performs all other clutch mods.


I am a Dealer for the MTC clutch mod. If your interested in ordering or would like more info send Me an e-mail.

Frank
Psycho Bike Performance
suzukinos@aol.com




IP: Logged

MOTORHEAD
Administrator posted 12-10-2000 12:04 PM
--------------------------------------------------------------------------------
ALTERING YOUR SPRING PRLOAD WILL ALTER THE AMOUNT OF LOAD IT TAKES TO MAKE THE LOCK UPO INGAGE!
IP: Logged

AQUADIOS
NEW MEMBER posted 12-10-2000 01:44 PM
--------------------------------------------------------------------------------
Yo, Ozzie,
I know a guy that thought he could do it in the bike, welded it up and the first launch it detached, ended up with all the welding **** and flux, slag etc in the oil, dumb **** thing to do.

for sure Frank's stuff is top of the line, the schnitz mod is less expense and works for the street rider, but if you're a serious racer, talk with Frank and others.