Contact Us
08-05-2001, 10:55pm
G'day Ardvark, (interesting name)
To set the TPS up make sure you're bike is idleing at 1150 rpm. You will need to then attach two wires to the TPS connector(the colour of the wire esacpes me at the moment) but by memory its the pair towards the front of the motor.
Make sure you have a good contact as they are a sealed type connector, then with a digital meter adjust the voltage to see 1.20 VDC at the RPM stated.
If you have any further questions just post.
Sorry to be a bit vague.
Regards Col
To set the TPS up make sure you're bike is idleing at 1150 rpm. You will need to then attach two wires to the TPS connector(the colour of the wire esacpes me at the moment) but by memory its the pair towards the front of the motor.
Make sure you have a good contact as they are a sealed type connector, then with a digital meter adjust the voltage to see 1.20 VDC at the RPM stated.
If you have any further questions just post.
Sorry to be a bit vague.
Regards Col