Contact Us
27-06-2005, 12:05pm
If you have a 9V power source ie 9V battery you can clean them yourselves in an ultrasonic bath using Shellite for eg.
The injector needs to be fully open ( actuated ) to be cleaned.
I have also heard Rod about the insitu cleaning , however I cant see this being a complete solution. I'd be interested to learn how they do this and what are the claims for success.
Best to remove , have flowed 1st @ 6ms pulse then wide open @ spec supply pressure, check for spray pattern . If not up to spec then ultrasonioc clean, then repeat above procedure. <i></i>
The injector needs to be fully open ( actuated ) to be cleaned.
I have also heard Rod about the insitu cleaning , however I cant see this being a complete solution. I'd be interested to learn how they do this and what are the claims for success.
Best to remove , have flowed 1st @ 6ms pulse then wide open @ spec supply pressure, check for spray pattern . If not up to spec then ultrasonioc clean, then repeat above procedure. <i></i>