Contact Us
27-11-2006, 11:39pm
I just recently got these going, I have some directions put together for the indicator, and I have some photos of the shift light / indicator setting with directions on that. I don't have them all put together yet in a pdf, I can post a few photos though.
Setup is very easy, there are 2 pushbuttons used to set each RPM setting with a set of dipswitches and a corresponding table, the LED's flash back to you there setting to make sure you have it correct.
Here is a video of a indicator / shift light where you can see the LED's flashing back a setting of 9900 RPM.
www.boostbysmith.com/Videos/bikermike.wmv
The shift light doesn't flash like that, stays on solid until RPm is below the setpoint, just flashes the settings to y ou to make sure you have it correct.
WARNING: If you are using the shift light to trigger your air shifter, turn air shifter off when making your setting or you will try and shift the bike when it flashes.
Setup is very easy, there are 2 pushbuttons used to set each RPM setting with a set of dipswitches and a corresponding table, the LED's flash back to you there setting to make sure you have it correct.
Here is a video of a indicator / shift light where you can see the LED's flashing back a setting of 9900 RPM.
www.boostbysmith.com/Videos/bikermike.wmv
The shift light doesn't flash like that, stays on solid until RPm is below the setpoint, just flashes the settings to y ou to make sure you have it correct.
WARNING: If you are using the shift light to trigger your air shifter, turn air shifter off when making your setting or you will try and shift the bike when it flashes.