22-06-2006, 09:09pm
Well Guys this is who we are using in the SSGM for all our plating
Its hard to find a good chrome plater that will chrome alloy
If you clean up your parts before hand, back to 320 wet & dry you will save
Its best to clean up your parts first and take them in for a free quote
It takes about 2 weeks for turnaround but has done some within a week
If you ask for Richard and say your from the Australian Hayabusa club it can only help
Astor Metal Finishes
93 Malta st (end of the street, off Woodville rd)
Villawood
9727 5622
ps things thay can do
Disassemble (not sure they mean bike)
Paint strip
Chrome strip
Full strip
Sandblast
Linish
Polish
Detail polish
Copper
Copper Finish
Plating
post plat, polish
Lacquer
reassemble
Ok time to fess up I'm Copper plating mine with a gloss tinted coat of lacquer a
Finished
Cheers Robert
Aren't all 'busas Copper, the others are just all poor slow copies !!!!!<i>Edited by: simmo at: 21/9/06 9:14 pm
</i>
Its hard to find a good chrome plater that will chrome alloy
If you clean up your parts before hand, back to 320 wet & dry you will save
Its best to clean up your parts first and take them in for a free quote
It takes about 2 weeks for turnaround but has done some within a week
If you ask for Richard and say your from the Australian Hayabusa club it can only help
Astor Metal Finishes
93 Malta st (end of the street, off Woodville rd)
Villawood
9727 5622
ps things thay can do
Disassemble (not sure they mean bike)
Paint strip
Chrome strip
Full strip
Sandblast
Linish
Polish
Detail polish
Copper
Copper Finish
Plating
post plat, polish
Lacquer
reassemble
Ok time to fess up I'm Copper plating mine with a gloss tinted coat of lacquer a
Finished
Cheers Robert
Aren't all 'busas Copper, the others are just all poor slow copies !!!!!<i>Edited by: simmo at: 21/9/06 9:14 pm
</i>