27-11-2005, 08:23pm
Pan,
Great write up mate. I used your install to guide me on fitting my Illumiglo's (thanks FF1) they went in with no hassles I even cleaned up the wiring for the heated grips and shift light at the same time.
You can fit Illumiglo's without taking off the needles just bend them slightly and put matches under them to stop them sticking.
Hardest part of the job was finding the right type of matches - the guy at the shop looked at me for a minute and said these would suit me perfectly.
I've been out to the garage twice already tonight just to turn on the ignition and watch them GLOW.
Bruce
See here, young man, from Walgett to the sea,
From Conroy’s Gap to Castlereagh, there’s none can ride like me.
<i></i>
Great write up mate. I used your install to guide me on fitting my Illumiglo's (thanks FF1) they went in with no hassles I even cleaned up the wiring for the heated grips and shift light at the same time.
You can fit Illumiglo's without taking off the needles just bend them slightly and put matches under them to stop them sticking.
Hardest part of the job was finding the right type of matches - the guy at the shop looked at me for a minute and said these would suit me perfectly.
I've been out to the garage twice already tonight just to turn on the ignition and watch them GLOW.
Bruce
See here, young man, from Walgett to the sea,
From Conroy’s Gap to Castlereagh, there’s none can ride like me.
<i></i>