05-08-2006, 11:04pm
Hey Darryl,
Thanks for the info.
There is good news and there is bad news.....
First the good one : We have been able to order another 5 different sizes of pins for the the head lifting stands
Now, the bad one : the sizes of them are not smaller, but bigger than the 18mm. So, the extra 5 pin sizes are as follows: 19, 20, 21, 24 & 27mm. So I think the simplest is to machine the 13 mm one down to 12
Cheers,
Pete
<i></i>
Thanks for the info.
There is good news and there is bad news.....
First the good one : We have been able to order another 5 different sizes of pins for the the head lifting stands
Now, the bad one : the sizes of them are not smaller, but bigger than the 18mm. So, the extra 5 pin sizes are as follows: 19, 20, 21, 24 & 27mm. So I think the simplest is to machine the 13 mm one down to 12
Cheers,
Pete
<i></i>