13-09-2006, 10:49pm
I have a bunch of pics of my bike in general section listed, I recently started building gear based boost controllers much like what I have on my bike. I have a 6 stage fully adjustable boost controller where you can change the boost level in every gear 1-6. that is a little overkill, the basic system I sell gives you 4 stages of boost. 1 stage being your spring pressure from the wastegate.
1st gear: spring pressure
2nd gear: solenoid with bleed valve
3rd gear: solenoid with bleed valve
4th-6th ger: solenoid with regulator
I can make anything you want, I have made several custom ones for guys ranging from 3 solenoids with 3 regulators, 5 solenoids with 5 regulators, 3 solenoids with 3 bleeds for internal wastegate only etc.
I wire up the gear position sensor to provide grounds for each gear to be used to ground the corresponding solenoid. So you can have rock solid boost control.
Price for the standard one I build is $215 US + actual shipping + gps core charge if you can't send your gps sensor to me in advance.
Lead time is 3-4 days from the time I receive a deposit.
<i></i>
1st gear: spring pressure
2nd gear: solenoid with bleed valve
3rd gear: solenoid with bleed valve
4th-6th ger: solenoid with regulator
I can make anything you want, I have made several custom ones for guys ranging from 3 solenoids with 3 regulators, 5 solenoids with 5 regulators, 3 solenoids with 3 bleeds for internal wastegate only etc.
I wire up the gear position sensor to provide grounds for each gear to be used to ground the corresponding solenoid. So you can have rock solid boost control.
Price for the standard one I build is $215 US + actual shipping + gps core charge if you can't send your gps sensor to me in advance.
Lead time is 3-4 days from the time I receive a deposit.
<i></i>